Schema caaml.xsd

schema location:	http://www.avisualanche.ca/public/CAAML/2.2.6/caaml.xsd
targetNamespace:	http://www.avalanche.ca/caaml

Elements	Complex types
CAA_DATA	CAAMLRootElementType

schema location:	http://www.avisualanche.ca/public/CAAML/2.2.6/caaml_base.xsd
targetNamespace:	http://www.avalanche.ca/caaml

Elements	Groups	Complex types	Simple types
COMMENT	ANY_ELEMENT	TimeRangeStartEnd	DateValidForecast
DISCLAIMER		TimeValue	IDType
		ValueRangeNonNegativeInteger	MeasTypeAv
			MeasTypeWx
			NoEmptyString
			NonNegativeDecimal
			NonNegativeFloat
			NonNegativeInt
			PercentValue
			PrivacyLevel
			TimeRangeHours
			TimeZoneEnum
			UnitsDensity
			UnitsLengthIntermed
			UnitsLengthLarge
			UnitsLengthSmall
			UnitsPressure
			UnitsTemperature
			UnitsWeight
			UnitsWindSpeed

schema location:	http://www.avisualanche.ca/public/CAAML/2.2.6/caaml_bull.xsd
targetNamespace:	http://www.avalanche.ca/caaml

Groups	Simple types
ObsParametersBulletin	RatingRAA

schema location:	http://www.avisualanche.ca/public/CAAML/2.2.6/caaml_geog.xsd
targetNamespace:	http://www.avalanche.ca/caaml

Elements	Groups	Complex types	Simple types	Attr. groups
_LOCATION_CATALOG_ELEMENT	TerrainCharacteristics	AbstractLocationCollectionType	DirectionCardinal	LocationChildAttributeGroup
AV_PATH	TerrainFeatures	AbstractLocationType	ElevValue	LocationParentAttributeGroup
AVALANCHE	TerrainParameters	AbstractLocationTypeLocCatalog	MtnRangeEnum
DEPOSIT		AvalancheType	Status
FORECAST_AREA		AvPathType
FRACTURE_LINE		DepositType
GENERIC		Elevation
LOC_ABBREV		ElevationRange
LOC_CHILDREN		ForecastAreaType
LOC_DESCRIPTION		FractureLineType
LOC_NAME		GenericLocationType
LOC_PARENTS		LocationChildGenericType
LOCATION_REFERENCE		LocationChildMtnRangeType
MTN_RANGE		LocationChildrenType
OPERATING_ZONE		LocationParentGenericType
OPERATION_LOCATION		LocationParentMtnRangeType
SKI_RUN		LocationParentsType
STARTING_ZONE		LocationReferenceType
TRIGGER_POINT		MtnRangeType
WX_SITE		OperatingZoneType
		OperationLocationType
		SkiRunType
		StartingZoneType
		TriggerPointType
		WxSiteType

schema location:	http://www.avisualanche.ca/public/CAAML/2.2.6/caaml_obs.xsd
targetNamespace:	http://www.avalanche.ca/caaml

Elements	Complex types	Attr. groups
_OBSERVATION	AbstractObservationType	ObservationAttributeGroup
AV_ACTIVITY	AbstractObservationTypeMultiLocRef
AV_OBS	AbstractObservationTypeOptionalMultiLocRef
BULLETIN	AbstractObservationTypeSingleLocRef
EXT_DATA	AvalancheActivityObservationType
FIELD_OBS	AvalancheObservationType
SNOWPACK_STRUCTURE	BulletinType
SNOWPPROFILE	ExternalDataType
STABILITY	FieldObservationType
WX_OBS	ObservationAssociationType
WX_SYNOPSIS	SnowpackStructureObservationType
	SnowprofileObservationType
	StabilityObservationType
	WeatherObservationType
	WeatherSynopsisObservationType

schema location:	http://www.avisualanche.ca/public/CAAML/2.2.6/caaml_ogrs.xsd
targetNamespace:	http://www.avalanche.ca/caaml

Groups	Complex types	Simple types
ObsParametersAv	AvTrigger	AvMoisture
ObsParametersDngr	GrainTypeSize	AvNum
ObsParametersField	Penetration	AvSize
ObsParametersReport	SkyCondition	PrecipTypeIntensity
ObsParametersSnowProfile	SnowHeight	RatingHazard
ObsParametersStb	SnowHeightIrregular	RatingStability
ObsParametersWx	SnowTemp	SnowHeightValue
	Temp	TempValue
	Wind	Trend
	Xport

schema location:	http://www.avisualanche.ca/public/CAAML/2.2.6/caaml_oper.xsd
targetNamespace:	http://www.avalanche.ca/caaml

Groups	Complex types	Simple types
ContactInfo	Operation	CountryEnum
OperationInfo	OperationBase	Email
	OperationReference	OperationType
	Person	PostalCode
	PersonBase	ProvinceStateEnum
	PersonReferenceBusiness	TelephoneFaxNumber
	PersonReferencePrivate

schema location:	http://schemas.opengis.net/gml/3.1.0/base/feature.xsd
targetNamespace:	http://www.opengis.net/gml

Elements	Complex types
_Feature	AbstractFeatureCollectionType
_FeatureCollection	AbstractFeatureType
boundedBy	BoundedFeatureType
centerLineOf	BoundingShapeType
centerOf	EnvelopeWithTimePeriodType
edgeOf	FeatureArrayPropertyType
EnvelopeWithTimePeriod	FeatureCollectionType
extentOf	FeaturePropertyType
FeatureCollection	LocationPropertyType
featureMember	PriorityLocationPropertyType
featureMembers
featureProperty
location
LocationKeyWord
LocationString
position
priorityLocation

schema location:	http://schemas.opengis.net/gml/3.1.0/base/geometryBasic2d.xsd
targetNamespace:	http://www.opengis.net/gml

Elements	Complex types
_Ring	AbstractRingPropertyType
_Surface	AbstractRingType
exterior	AbstractSurfaceType
innerBoundaryIs	LinearRingPropertyType
interior	LinearRingType
LinearRing	PolygonPropertyType
outerBoundaryIs	PolygonType
Polygon	SurfaceArrayPropertyType
polygonProperty	SurfacePropertyType
surfaceArrayProperty
surfaceProperty

schema location:	http://schemas.opengis.net/gml/3.1.0/base/temporal.xsd
targetNamespace:	http://www.opengis.net/gml

Elements	Complex types	Simple types
_TimeComplex	AbstractTimeComplexType	CalDate
_TimeGeometricPrimitive	AbstractTimeGeometricPrimitiveType	TimeIndeterminateValueType
_timeLength	AbstractTimeObjectType	TimeLengthType
_TimeObject	AbstractTimePrimitiveType	TimePositionUnion
_TimePrimitive	RelatedTimeType	TimeUnitType
duration	TimeGeometricPrimitivePropertyType
TimeInstant	TimeInstantPropertyType
timeInterval	TimeInstantType
TimePeriod	TimeIntervalLengthType
timePosition	TimePeriodPropertyType
validTime	TimePeriodType
	TimePositionType
	TimePrimitivePropertyType

schema location:	http://schemas.opengis.net/gml/3.1.0/base/geometryBasic0d1d.xsd
targetNamespace:	http://www.opengis.net/gml

Elements	Groups	Complex types	Attr. groups
_Curve	geometricPositionGroup	AbstractCurveType	SRSInformationGroup
_GeometricPrimitive	geometricPositionListGroup	AbstractGeometricPrimitiveType	SRSReferenceGroup
_Geometry		AbstractGeometryType
coord		CoordType
coordinates		CurveArrayPropertyType
curveArrayProperty		CurvePropertyType
curveProperty		DirectPositionListType
Envelope		DirectPositionType
LineString		EnvelopeType
lineStringProperty		GeometricPrimitivePropertyType
Point		GeometryArrayPropertyType
pointArrayProperty		GeometryPropertyType
pointProperty		LineStringPropertyType
pointRep		LineStringType
pos		PointArrayPropertyType
posList		PointPropertyType
vector		PointType
		VectorType

schema location:	http://schemas.opengis.net/gml/3.1.0/base/gmlBase.xsd
targetNamespace:	http://www.opengis.net/gml

Elements	Groups	Complex types	Attr. groups
_association	StandardObjectProperties	AbstractGMLType	AssociationAttributeGroup
_GML		AbstractMetaDataType
_MetaData		ArrayAssociationType
_Object		ArrayType
_reference		AssociationType
_strictAssociation		BagType
Array		GenericMetaDataType
Bag		MetaDataPropertyType
description		ReferenceType
GenericMetaData		StringOrRefType
member
members
metaDataProperty
name

schema location:	http://schemas.opengis.net/gml/3.1.0/base/measures.xsd
targetNamespace:	http://www.opengis.net/gml

Elements	Complex types	Simple types
angle	AngleChoiceType	ArcMinutesType
decimalMinutes	AngleType	ArcSecondsType
degrees	AreaType	DecimalMinutesType
dmsAngle	DegreesType	DegreeValueType
measure	DMSAngleType
minutes	GridLengthType
seconds	LengthType
	ScaleType
	SpeedType
	TimeType
	VolumeType

schema location:	http://schemas.opengis.net/gml/3.1.0/base/basicTypes.xsd
targetNamespace:	http://www.opengis.net/gml

Elements	Complex types	Simple types
Null	CodeListType	booleanList
	CodeOrNullListType	booleanOrNull
	CodeType	booleanOrNullList
	CoordinatesType	doubleList
	MeasureListType	doubleOrNull
	MeasureOrNullListType	doubleOrNullList
	MeasureType	integerList
		integerOrNull
		integerOrNullList
		NameList
		NameOrNull
		NameOrNullList
		NCNameList
		NullEnumeration
		NullType
		QNameList
		SignType
		stringOrNull

schema location:	http://schemas.opengis.net/gml/3.1.0/xlink/xlinks.xsd
targetNamespace:	http://www.w3.org/1999/xlink

Attr. groups

arcLink

schema location:	http://schemas.opengis.net/gml/3.1.0/base/units.xsd
targetNamespace:	http://www.opengis.net/gml

Elements	Complex types
BaseUnit	BaseUnitType
catalogSymbol	ConventionalUnitType
ConventionalUnit	ConversionToPreferredUnitType
conversionToPreferredUnit	DerivationUnitTermType
derivationUnitTerm	DerivedUnitType
DerivedUnit	FormulaType
quantityType	UnitDefinitionType
roughConversionToPreferredUnit	UnitOfMeasureType
UnitDefinition
unitOfMeasure

schema location:	http://schemas.opengis.net/gml/3.1.0/base/dictionary.xsd
targetNamespace:	http://www.opengis.net/gml

Elements	Complex types
Definition	DefinitionProxyType
DefinitionCollection	DefinitionType
definitionMember	DictionaryEntryType
DefinitionProxy	DictionaryType
definitionRef	IndirectEntryType
Dictionary
dictionaryEntry
indirectEntry

element CAA_DATA

diagram

namespace

http://www.avalanche.ca/caaml

OPERATION EXTENSION_DEFS DISCLAIMER

INDICATES SENDER OF XML FILE

DESCRIPTION OF XML FILE PURPOSE

DATE STAMP OF XML FILE

TIME STAMP OF XML FILE

identity constraints

	Name	Refer	Selector	Field(s)
unique	operationUniqueIds		OPERATION	@OP_ID

annotation

documentation

CAAML root element

complexType CAAMLRootElementType

diagram

namespace

http://www.avalanche.ca/caaml

children

OPERATION EXTENSION_DEFS DISCLAIMER

INDICATES SENDER OF XML FILE

DESCRIPTION OF XML FILE PURPOSE

DATE STAMP OF XML FILE

TIME STAMP OF XML FILE

annotation

documentation

Type definition for CAAML root element

element CAAMLRootElementType/OPERATION

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

PEOPLE_INFO OPERATION_INFO LOCATION_INFO DATE_OBS EXT_DATA LINKS

GLOBALLY UNIQUE OPERATION IDENTIFIER

OP_NAME

required

documentation

FULL NAME OF OPERATION

identity constraints

	Name	Refer	Selector	Field(s)
unique	LocationIdsUniqueForOperation		LOCATION_INFO/*	@LOC_ID

annotation

documentation

INFOEX DATA GROUPED BY  INDIVIDUAL OPERATIONS

element CAAMLRootElementType/OPERATION/PEOPLE_INFO

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

PEOPLE NAMES AND PRIVATE CONTACT INFORMATION

element CAAMLRootElementType/OPERATION/PEOPLE_INFO/PEOPLE_PRIVATE

diagram

namespace

http://www.avalanche.ca/caaml

type

Person

properties

isRef	0
content	complex

children

FIRST_NAME LAST_NAME INITIALS PO_BOX STREET_ADDRESS CITY PROVINCE COUNTRY POSTAL_CODE PHONE FAX EMAIL

attributes

Name	Type	Use	Default	Fixed	Annotation
PERS_ID	IDType	optional
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

element CAAMLRootElementType/OPERATION/OPERATION_INFO

diagram

namespace

http://www.avalanche.ca/caaml

type

Operation

properties

isRef	0
content	complex

children

NAME ABBREV LOGO LOCATION_REFERENCE TYPE TIME_ZONE PO_BOX STREET_ADDRESS CITY PROVINCE COUNTRY POSTAL_CODE PHONE FAX EMAIL WEBSITE SPONSOR CONTACT GROUPING

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

OPERATION CONTACT INFORMATION

element CAAMLRootElementType/OPERATION/LOCATION_INFO

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

_LOCATION_CATALOG_ELEMENT

annotation

documentation

LOCATION INFORMATION OF OPERATION

element CAAMLRootElementType/OPERATION/DATE_OBS

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

DATE OF OBSERVATIONS

TYPE OF REPORT (???)

identity constraints

	Name	Refer	Selector	Field(s)
unique	WxObsIdsUniqueForOperation		WX_OBS	@ID
unique	WxSynIdsUniqueForOperation		WX_SYNOPSIS	@ID
unique	FieldObsIdsUniqueForOperation		FIELD_OBS	@ID
unique	AvObsIdsUniqueForOperation		AV_OBS	@ID
unique	AAReportIdsUniqueForOperation		AV_ACTIVITY	@ID
unique	SSReportIdsUniqueForOperation		SNOWPACK_STRUCTURE	@ID
unique	SnowProfileUniqueForOperation		SNOW_PROFILE	@ID
unique	STBRatingIdsUniqueForOperation		STABILITY	@ID
unique	BulletinIdsUniqueForOperation		BULLETIN	@ID
unique	ExDataIdsUniqueForOperation		EX_DATA	@ID

annotation

documentation

OBSERVATION DATA OF OPERATION

element CAAMLRootElementType/OPERATION/LINKS

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

LINK

identity constraints

	Name	Refer	Selector	Field(s)
unique	linkUniqueIds		LINK	@ID

annotation

documentation

LINKS AMONG ELEMENTS WITHIN AND OUTSIDE THE ENTRIE  XML DOCUMENT

element CAAMLRootElementType/OPERATION/LINKS/LINK

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

UNIQUE IDENTIFIER OF LINK

IDENTIFIES PURPOSE OF LINKED OBJECTS

IDENTIFIES OPTIONAL MAIN OBJECT OF LINK

annotation

documentation

LINK IDS

element CAAMLRootElementType/OPERATION/LINKS/LINK/OBJ

diagram

namespace

http://www.avalanche.ca/caaml

type

ObservationAssociationType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element CAAMLRootElementType/EXTENSION_DEFS

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

element COMMENT

diagram

namespace

http://www.avalanche.ca/caaml

element	CAAMLRootElementType/OPERATION/LINKS/LINK
complexTypes	AbstractObservationType LocationChildGenericType LocationChildMtnRangeType LocationParentGenericType LocationParentMtnRangeType ObservationAssociationType
groups	TerrainCharacteristics TerrainFeatures

annotation

documentation

GENERAL COMMENT ELEMENT

element DISCLAIMER

diagram

namespace

http://www.avalanche.ca/caaml

AbstractObservationType CAAMLRootElementType

annotation

documentation

GLOBAL DISCLAIMER ELEMENT

group ANY_ELEMENT

diagram

namespace

http://www.avalanche.ca/caaml

used by

elements	CAAMLRootElementType/OPERATION/DATE_OBS CAAMLRootElementType/OPERATION/LINKS/LINK CAAMLRootElementType/OPERATION BulletinType/RELATED_OBS
complexType	ExternalDataType
groups	ObsParametersAv ObsParametersBulletin ObsParametersDngr ObsParametersField ObsParametersReport ObsParametersSnowProfile ObsParametersStb ObsParametersWx

annotation

documentation

GLOBAL GROUP ANY ELEMENT

complexType TimeRangeStartEnd

diagram

namespace

http://www.avalanche.ca/caaml

AvalancheActivityObservationType/TIME_OBS FieldObservationType/TIME_OBS SnowpackStructureObservationType/TIME_OBS WeatherSynopsisObservationType/TIME_OBS StabilityObservationType/TIME_RTG

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

annotation

documentation

TYPE DEFINITION TIME RANGE (start and end time)

element TimeRangeStartEnd/FROM

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:time

properties

isRef	0
content	simple
nillable	true

annotation

documentation

START TIME OF PERIOD

element TimeRangeStartEnd/TO

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:time

properties

isRef	0
content	simple
nillable	true

annotation

documentation

END TIME OF PERIOD

complexType TimeValue

diagram

namespace

http://www.avalanche.ca/caaml

SnowprofileObservationType/TIME_OBS WeatherObservationType/TIME_OBS AvalancheObservationType/TIME_OCCUR AbstractObservationType/TIME_REPORT BulletinType/VALID_TIME

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

annotation

documentation

TYPE DEFINITION TIME

complexType ValueRangeNonNegativeInteger

diagram

namespace

http://www.avalanche.ca/caaml

DepositType/DEPOSIT_LENGTH ObsParametersAv/DEPOSIT_LENGTH DepositType/DEPOSIT_WIDTH ObsParametersAv/DEPOSIT_WIDTH AvalancheType/LENGTH_RUN ObsParametersAv/LENGTH_RUN ObsParametersAv/SLAB_THICK ObsParametersAv/SLAB_WIDTH

annotation

documentation

Numerical range of integer numbers

element ValueRangeNonNegativeInteger/MIN

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

properties

isRef	0
content	simple
nillable	true

Minimum value of range

element ValueRangeNonNegativeInteger/MAX

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

properties

isRef	0
content	simple
nillable	true

Maximum value of range

simpleType DateValidForecast

namespace

http://www.avalanche.ca/caaml

type

union of (xs:date, restriction of xs:string)

used by

element

BulletinType/VALID_DATE

annotation

documentation

DATE VALID FOR FORECASTS

simpleType IDType

namespace

http://www.avalanche.ca/caaml

type

restriction of NoEmptyString

used by

attributes

ObservationAttributeGroup/@ID CAAMLRootElementType/OPERATION/LINKS/LINK/@ID LocationParentAttributeGroup/@LOC_ID AbstractLocationTypeLocCatalog/@LOC_ID LocationReferenceType/@LOC_ID LocationChildAttributeGroup/@LOC_ID CAAMLRootElementType/OPERATION/LINKS/LINK/@MAIN_OBJ_ID CAAMLRootElementType/OPERATION/LINKS/LINK/@MAIN_OBJ_OP_ID ObservationAttributeGroup/@OP_ID LocationParentAttributeGroup/@OP_ID LocationChildAttributeGroup/@OP_ID OperationBase/@OP_ID PersonBase/@OP_ID LocationReferenceType/@OP_ID AbstractLocationTypeLocCatalog/@OP_ID CAAMLRootElementType/OPERATION/@OP_ID LOC_NAME/@OP_ID PersonBase/@PERS_ID

Unique identifier in CAAML document

simpleType MeasTypeAv

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

attributes

facets

enumeration	ESTIM
enumeration	MEAS

annotation

documentation

MEASUREMENT TYPE OFAVALANCHE OBSERVATIONS

simpleType MeasTypeWx

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

element

WxSiteType/WX_SITE_TYPE

attributes

facets

enumeration	MAN
enumeration	AUTO

annotation

documentation

MEASUREMENT TYPE OF WEATHER OBSERVATIONS

simpleType NoEmptyString

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements	OperationBase/ABBREV PersonBase/FIRST_NAME PersonBase/INITIALS PersonBase/LAST_NAME LOC_ABBREV OperationBase/NAME
simpleTypes	IDType MtnRangeEnum
attributes	LocationChildAttributeGroup/@CHILD_SORT_KEY CAAMLRootElementType/@FILE_PURPOSE CAAMLRootElementType/@FILE_SOURCE LocationChildAttributeGroup/@GROUP_DESCR LocationParentAttributeGroup/@GROUP_DESCR ObservationAssociationType/@ID LocationParentAttributeGroup/@LOC_SORT_KEY ObservationAssociationType/@OP_ID

Non-empty string

simpleType NonNegativeDecimal

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:decimal

used by

elements

ObsParametersWx/BARO_PRESSURE/ABSOLUTE DepositType/DEPOSIT_ROAD_DEPTH ObsParametersAv/DEPOSIT_ROAD_DEPTH GrainTypeSize/GRAIN_SIZE/MAX GrainTypeSize/GRAIN_SIZE/MIN ObsParametersWx/PRECIP_GAUGE_ACCUM ObsParametersWx/RAIN_GAUGE

facets

minInclusive	0
fractionDigits	1

annotation

documentation

Positive decimal number with one decimal digit

simpleType NonNegativeFloat

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:float

Non-negative float number

simpleType NonNegativeInt

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

used by

elements	SnowHeight/DENSITY DepositType/DEPOSIT_ROAD_LENGTH ObsParametersAv/DEPOSIT_ROAD_LENGTH AvTrigger/DISTANCE DepositType/DISTANCE_ROAD_TOE ObsParametersAv/DISTANCE_ROAD_TOE Wind/SPEED/NUM SnowHeight/WEIGHT
complexType	Penetration
simpleType	AvNum
attributes	SnowTemp/@DEPTH ObsParametersWx/SNOW_TEMP_10/@DEPTH ObsParametersWx/AIR_TEMP_MAX/@INTERVAL ObsParametersWx/AIR_TEMP_MIN/@INTERVAL SnowHeight/WEIGHT/@TUBE_DIAM

Non-negative integer number

simpleType PercentValue

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

minInclusive	0
maxInclusive	100

annotation

documentation

Percent value (0-100)

simpleType PrivacyLevel

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

attributes

PersonBase/@PRIVACY OperationBase/@PRIVACY ContactInfo/PO_BOX/@PRIVACY ContactInfo/STREET_ADDRESS/@PRIVACY ContactInfo/CITY/@PRIVACY ContactInfo/PROVINCE/@PRIVACY ContactInfo/COUNTRY/@PRIVACY ContactInfo/POSTAL_CODE/@PRIVACY ContactInfo/PHONE/@PRIVACY ContactInfo/FAX/@PRIVACY ContactInfo/EMAIL/@PRIVACY OperationInfo/TYPE/@PRIVACY OperationInfo/TIME_ZONE/@PRIVACY OperationInfo/WEBSITE/@PRIVACY ObservationAttributeGroup/@PRIVACY

facets

enumeration	General Public
enumeration	Technical Public Bulletin
enumeration	Professional Exchange
enumeration	Private

annotation

documentation

Enumeration of privacy levels

simpleType TimeRangeHours

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:float

used by

element

AvalancheObservationType/TIME_OCCUR_RANGE

facets

minInclusive	0
pattern	0.0
pattern	0.5
pattern	.5
pattern	\d+
pattern	\d+.0

annotation

documentation

TYPE DEFINITION TIME RANGE (number of hours)

simpleType TimeZoneEnum

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

element	OperationInfo/TIME_ZONE
attributes	TimeRangeStartEnd/@TIME_ZONE TimeValue/@TIME_ZONE SnowHeightIrregular/@TIME_ZONE

facets

enumeration	PST
enumeration	PDT
enumeration	MST
enumeration	MDT
enumeration	CST
enumeration	CDT
enumeration	EST
enumeration	EDT
enumeration	AST
enumeration	ADT
enumeration	NST
enumeration	NDT
enumeration	YST
enumeration	YDT
enumeration	AKST
enumeration	AKDT

annotation

documentation

TIME ZONE ENUMERATIONS

simpleType UnitsDensity

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

attribute

SnowHeight/DENSITY/@UNITS

facets

enumeration	kg/m3
enumeration	g/m3

annotation

documentation

DENSITY UNITS (kg/m3, g/cm3)

simpleType UnitsLengthIntermed

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

attributes

ElevationRange/@UNITS Elevation/@UNITS AvalancheType/LENGTH_RUN/@UNITS DepositType/DEPOSIT_ROAD_LENGTH/@UNITS DepositType/DEPOSIT_ROAD_DEPTH/@UNITS DepositType/DISTANCE_ROAD_TOE/@UNITS DepositType/DEPOSIT_WIDTH/@UNITS DepositType/DEPOSIT_LENGTH/@UNITS AvTrigger/DISTANCE/@UNITS ObsParametersAv/SLAB_WIDTH/@UNITS ObsParametersAv/DEPOSIT_ROAD_LENGTH/@UNITS ObsParametersAv/DEPOSIT_ROAD_DEPTH/@UNITS ObsParametersAv/DISTANCE_ROAD_TOE/@UNITS ObsParametersAv/DEPOSIT_WIDTH/@UNITS ObsParametersAv/DEPOSIT_LENGTH/@UNITS ObsParametersAv/LENGTH_RUN/@UNITS

facets

enumeration	m
enumeration	ft

annotation

documentation

INTERMEDIATE LENGTH UNITS (m, ft)

simpleType UnitsLengthLarge

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

facets

enumeration	km
enumeration	mi

annotation

documentation

LARGE LENGTH UNITS (km, mi)

simpleType UnitsLengthSmall

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

attributes

ObsParametersWx/SNOW_TEMP_10/@DEPTH_UNITS SnowHeight/WEIGHT/@TUBE_DIAM_UNITS GrainTypeSize/GRAIN_SIZE/@UNITS Penetration/@UNITS SnowHeight/SNOW_HEIGHT/@UNITS SnowHeight/W/@UNITS ObsParametersAv/SLAB_THICK/@UNITS ObsParametersWx/RAIN_GAUGE/@UNITS ObsParametersWx/PRECIP_GAUGE_ACCUM/@UNITS

facets

enumeration	mm
enumeration	cm
enumeration	in

annotation

documentation

SMALL LENGTH UNITS (mm, cm, in)

simpleType UnitsPressure

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

attribute

ObsParametersWx/BARO_PRESSURE/ABSOLUTE/@UNITS

facets

enumeration	kPa
enumeration	hPa
enumeration	mbar
enumeration	mm Hg
enumeration	in Hg

annotation

documentation

PRESSURE UNITS (kPa, hPa, mbar, mm Hg, in Hg)

simpleType UnitsTemperature

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

attributes

Temp/@UNITS ObsParametersField/AIR_TEMP/@UNITS ObsParametersWx/AIR_TEMP_PRES/@UNITS ObsParametersWx/AIR_TEMP_MAX/@UNITS ObsParametersWx/AIR_TEMP_MIN/@UNITS ObsParametersWx/SNOW_TEMP_10/@UNITS

facets

enumeration	C
enumeration	F

annotation

documentation

TEMPERATURE UNITS (C, F)

simpleType UnitsWeight

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

attribute

SnowHeight/WEIGHT/@UNITS

facets

enumeration	kg
enumeration	g
enumeration	lbs

annotation

documentation

WEIGHT UNITS (kg, g, lbs)

simpleType UnitsWindSpeed

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

attribute

Wind/SPEED/NUM/@UNITS

facets

enumeration	km/h
enumeration	m/s
enumeration	knts
enumeration	mph

annotation

documentation

WIND SPEED UNITS ENUMERATIONS

group ObsParametersBulletin

diagram

namespace

http://www.avalanche.ca/caaml

children

TYPE RAA_RATING RAA_DESCRIPTION RAA_RATING_24 RAA_RATING_48 RAA_RATING_72 RAA_REMARK DNGR_ALP DNGR_ALP_REMARK DNGR_TL DNGR_TL_REMARK DNGR_BTL DNGR_BTL_REMARK DNGR_REMARK TRAVEL_ADVISORY OUTLOOK SOAPBOX

Parameter group for avalanche bulletins

element ObsParametersBulletin/TYPE

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

annotation

documentation

PRODUCT TYPE

element ObsParametersBulletin/RAA_RATING

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingRAA

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	green
enumeration	yellow
enumeration	red

annotation

documentation

RECREATIONAL AVALANCHE ADVISORY

element ObsParametersBulletin/RAA_DESCRIPTION

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

annotation

documentation

DESCRIPTION OF RECREATIONAL AVALANCHE ADVISORY RATING

element ObsParametersBulletin/RAA_RATING_24

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingRAA

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	green
enumeration	yellow
enumeration	red

annotation

documentation

RECREATIONAL AVALANCHE ADVISORY FORECAST (24HRS)

element ObsParametersBulletin/RAA_RATING_48

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingRAA

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	green
enumeration	yellow
enumeration	red

annotation

documentation

RECREATIONAL AVALANCHE ADVISORY FORECAST (48HRS)

element ObsParametersBulletin/RAA_RATING_72

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingRAA

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	green
enumeration	yellow
enumeration	red

annotation

documentation

RECREATIONAL AVALANCHE ADVISORY FORECAST (72HRS)

element ObsParametersBulletin/RAA_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK FOR RECREATIONAL AVALANCHE ADVISORY

element ObsParametersBulletin/DNGR_ALP

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingHazard

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	LOW
enumeration	MODERATE
enumeration	CONSIDERABLE
enumeration	HIGH
enumeration	EXTREME

annotation

documentation

DANGER RATING FOR ALPINE

element ObsParametersBulletin/DNGR_ALP_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK WITH REGARD TO ALPINE DANGER RATING

element ObsParametersBulletin/DNGR_TL

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingHazard

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	LOW
enumeration	MODERATE
enumeration	CONSIDERABLE
enumeration	HIGH
enumeration	EXTREME

annotation

documentation

DANGER RATING FOR TREELINE

element ObsParametersBulletin/DNGR_TL_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK WITH REGARD TO TREELINE DANGER RATING

element ObsParametersBulletin/DNGR_BTL

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingHazard

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	LOW
enumeration	MODERATE
enumeration	CONSIDERABLE
enumeration	HIGH
enumeration	EXTREME

annotation

documentation

DANGER RATING FOR BELOW TREELINE

element ObsParametersBulletin/DNGR_BTL_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK WITH REGARD TO BELOW TREELINE DANGER RATING

element ObsParametersBulletin/DNGR_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

annotation

documentation

GENERAL REMARK REGARDING DANGER RATING

element ObsParametersBulletin/TRAVEL_ADVISORY

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

annotation

documentation

TRAVEL ADVISORY COMMENT

element ObsParametersBulletin/OUTLOOK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

annotation

documentation

BULLETIN OUTLOOK COMMENT

element ObsParametersBulletin/SOAPBOX

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

annotation

documentation

FORECASTER'S INTERNAL COMMENT

simpleType RatingRAA

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements

ObsParametersBulletin/RAA_RATING ObsParametersBulletin/RAA_RATING_24 ObsParametersBulletin/RAA_RATING_48 ObsParametersBulletin/RAA_RATING_72

facets

enumeration	~
enumeration	green
enumeration	yellow
enumeration	red

annotation

documentation

Enumeration for ecreational avalanche advisory rating type

element _LOCATION_CATALOG_ELEMENT

diagram

namespace

http://www.avalanche.ca/caaml

type

AbstractLocationTypeLocCatalog

properties

content	complex
substGrp	gml:_Feature
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

used by

element

CAAMLRootElementType/OPERATION/LOCATION_INFO

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Global abstract location element for location catalog (LOCATION_INFO)

element AV_PATH

diagram

namespace

http://www.avalanche.ca/caaml

type

AvPathType

properties

content	complex
substGrp	_LOCATION_CATALOG_ELEMENT

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN ASPECT ELEVATION INCLINE POSITION VEGETATION_BAND WIND_EXP SOLAR_EXP SKIABLE FEATURES HISTORY RELATIVE_LOC COMMENT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Avalanche Path Location Collection (included in LocationInfoGroup)

element AVALANCHE

diagram

namespace

http://www.avalanche.ca/caaml

type

AvalancheType

properties

content	complex
substGrp	gml:_FeatureCollection

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location gml:featureMember gml:featureMembers LOC_CHILDREN ASPECT ELEVATION INCLINE POSITION VEGETATION_BAND WIND_EXP SOLAR_EXP SKIABLE FEATURES HISTORY RELATIVE_LOC COMMENT LENGTH_RUN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Avalanche Location Collection

element DEPOSIT

diagram

namespace

http://www.avalanche.ca/caaml

type

DepositType

properties

content	complex
substGrp	gml:_Feature

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location ASPECT ELEVATION INCLINE POSITION VEGETATION_BAND WIND_EXP SOLAR_EXP SKIABLE FEATURES HISTORY RELATIVE_LOC COMMENT DEPOSIT_ROAD_LENGTH DEPOSIT_ROAD_DEPTH DISTANCE_ROAD_TOE DEPOSIT_WIDTH DEPOSIT_LENGTH

used by

element

AvalancheType/LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Deposit Location

element FORECAST_AREA

diagram

namespace

http://www.avalanche.ca/caaml

type

ForecastAreaType

properties

content	complex
substGrp	_LOCATION_CATALOG_ELEMENT

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Forecast Area Location Collection (included in LocationInfoGroup)

element FRACTURE_LINE

diagram

namespace

http://www.avalanche.ca/caaml

type

FractureLineType

properties

content	complex
substGrp	gml:_Feature

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location

used by

element

AvalancheType/LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Fracture Line Location

element GENERIC

diagram

namespace

http://www.avalanche.ca/caaml

type

GenericLocationType

properties

content	complex
substGrp	_LOCATION_CATALOG_ELEMENT

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Generic Location Collection (included in LocationInfoGroup)

element LOC_ABBREV

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of NoEmptyString

AbstractLocationTypeLocCatalog LocationChildMtnRangeType LocationParentGenericType LocationParentMtnRangeType LocationReferenceType

facets

minLength	1
maxLength	10

annotation

documentation

Location Abbreviation (max. 10 characters)

element LOC_CHILDREN

diagram

namespace

http://www.avalanche.ca/caaml

AV_PATH FORECAST_AREA GENERIC MTN_RANGE OPERATING_ZONE OPERATION_LOCATION SKI_RUN WX_SITE

used by

complexType

AbstractLocationTypeLocCatalog

annotation

documentation

Global element for location children

element LOC_DESCRIPTION

diagram

namespace

http://www.avalanche.ca/caaml

type

gml:StringOrRefType

properties

content	complex
substGrp	gml:description

used by

complexTypes

LocationChildMtnRangeType LocationParentGenericType LocationParentMtnRangeType LocationReferenceType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Short description of or additional information about location

element LOC_NAME

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:CodeType

properties

content	complex
substGrp	gml:name

used by

complexTypes

LocationParentGenericType LocationReferenceType

attributes

Name	Type	Use	Default	Fixed	Annotation
codeSpace	xs:anyURI	optional
OP_ID	IDType	optional

annotation

documentation

Distinctive name of location. Attibute OP_ID can be used to specify a domain of the name specified (follows gml:name)

element LOC_PARENTS

diagram

namespace

http://www.avalanche.ca/caaml

AbstractLocationTypeLocCatalog LocationReferenceType

annotation

documentation

Global element for location parents

element LOCATION_REFERENCE

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationReferenceType

properties

content	complex
substGrp	gml:_association

children

gml:_Object LOC_NAME LOC_DESCRIPTION LOC_ABBREV LOC_PARENTS STATUS

used by

complexTypes	AbstractObservationTypeMultiLocRef AbstractObservationTypeOptionalMultiLocRef AbstractObservationTypeSingleLocRef
group	OperationInfo


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Global location reference element

element MTN_RANGE

diagram

namespace

http://www.avalanche.ca/caaml

type

MtnRangeType

properties

content	complex
substGrp	_LOCATION_CATALOG_ELEMENT

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Mountain Range Location Collection (included in LocationInfoGroup)

element OPERATING_ZONE

diagram

namespace

http://www.avalanche.ca/caaml

type

OperatingZoneType

properties

content	complex
substGrp	_LOCATION_CATALOG_ELEMENT

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Operating Zone Collection (included in LocationInfoGroup)

element OPERATION_LOCATION

diagram

namespace

http://www.avalanche.ca/caaml

type

OperationLocationType

properties

content	complex
substGrp	_LOCATION_CATALOG_ELEMENT

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Operation Location Location Collection (included in LocationInfoGroup)

element SKI_RUN

diagram

namespace

http://www.avalanche.ca/caaml

type

SkiRunType

properties

content	complex
substGrp	_LOCATION_CATALOG_ELEMENT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Ski Run Location Collection (included in LocationInfoGroup)

element STARTING_ZONE

diagram

namespace

http://www.avalanche.ca/caaml

type

StartingZoneType

properties

content	complex
substGrp	gml:_Feature

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location ASPECT ELEVATION INCLINE POSITION VEGETATION_BAND WIND_EXP SOLAR_EXP SKIABLE FEATURES HISTORY RELATIVE_LOC COMMENT

used by

element

AvalancheType/LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

StartingZone Location

element TRIGGER_POINT

diagram

namespace

http://www.avalanche.ca/caaml

type

TriggerPointType

properties

content	complex
substGrp	gml:_Feature

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location ASPECT ELEVATION INCLINE POSITION VEGETATION_BAND WIND_EXP SOLAR_EXP SKIABLE FEATURES HISTORY RELATIVE_LOC COMMENT

used by

element

AvalancheType/LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Trigger Point Location

element WX_SITE

diagram

namespace

http://www.avalanche.ca/caaml

type

WxSiteType

properties

content	complex
substGrp	_LOCATION_CATALOG_ELEMENT

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN ELEVATION WX_SITE_TYPE

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Weather Site Location Collection (included in LocationInfoGroup)

group TerrainCharacteristics

diagram

namespace

http://www.avalanche.ca/caaml

children

ASPECT ELEVATION INCLINE POSITION VEGETATION_BAND WIND_EXP SOLAR_EXP SKIABLE FEATURES HISTORY RELATIVE_LOC COMMENT

used by

complexTypes

AvalancheType AvPathType DepositType SkiRunType StartingZoneType TriggerPointType

annotation

documentation

Group of all terrain characteristics

element TerrainCharacteristics/ASPECT

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

ASPECT (RANGE)

element TerrainCharacteristics/ASPECT/FROM

diagram

namespace

http://www.avalanche.ca/caaml

type

DirectionCardinal

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	N
enumeration	NNE
enumeration	NE
enumeration	ENE
enumeration	E
enumeration	ESE
enumeration	SE
enumeration	SSE
enumeration	S
enumeration	SSW
enumeration	SW
enumeration	WSW
enumeration	W
enumeration	WNW
enumeration	NW
enumeration	NNW
enumeration	VAR
enumeration	ALL

annotation

documentation

MAIN  ASPECT ELEMENT

element TerrainCharacteristics/ASPECT/TO

diagram

namespace

http://www.avalanche.ca/caaml

type

DirectionCardinal

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	N
enumeration	NNE
enumeration	NE
enumeration	ENE
enumeration	E
enumeration	ESE
enumeration	SE
enumeration	SSE
enumeration	S
enumeration	SSW
enumeration	SW
enumeration	WSW
enumeration	W
enumeration	WNW
enumeration	NW
enumeration	NNW
enumeration	VAR
enumeration	ALL

annotation

documentation

END OF ASPECT RANGE

element TerrainCharacteristics/ELEVATION

diagram

namespace

http://www.avalanche.ca/caaml

type

ElevationRange

properties

isRef	0
content	complex

children

MIN MAX

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m

annotation

documentation

ELEVATION (RANGE)

element TerrainCharacteristics/INCLINE

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

INCLINE (RANGE)

element TerrainCharacteristics/INCLINE/MIN

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

properties

isRef	0
content	simple
nillable	true

facets

minInclusive	0
maxInclusive	90

annotation

documentation

MINIMUM OF INCLINE RANGE

element TerrainCharacteristics/INCLINE/MAX

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

properties

isRef	0
content	simple
nillable	true

facets

minInclusive	0
maxInclusive	90

annotation

documentation

MAXIMUM OF INCLINE RANGE

element TerrainCharacteristics/POSITION

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

RELATIVE POSITION (RANGE)

element TerrainCharacteristics/POSITION/FROM

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	T
enumeration	M
enumeration	B
enumeration	U

annotation

documentation

BOTTOM OF RANGE

element TerrainCharacteristics/POSITION/TO

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	B
enumeration	M
enumeration	T
enumeration	U

annotation

documentation

TOP OF RANGE

element TerrainCharacteristics/VEGETATION_BAND

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Alpine
enumeration	Treeline
enumeration	Below Treeline

annotation

documentation

VEGETATION BAND

element TerrainCharacteristics/WIND_EXP

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Windward Slope(s)
enumeration	Lee Slope(s)
enumeration	Cross-loaded Slope
enumeration	Wind Pillow
enumeration	Down Flow

annotation

documentation

EXPOSURE TO WIND (TRANSPORT)

element TerrainCharacteristics/SOLAR_EXP

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Solar Aspect(s)
enumeration	Shaded Solar Aspect(s)
enumeration	Non-Solar Aspect(s)

annotation

documentation

EXPOSURE TO SOLAR RADIATION

element TerrainCharacteristics/SKIABLE

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Y
enumeration	N
enumeration	N-Y
enumeration	Yes
enumeration	No
enumeration	No-Yes

annotation

documentation

SKIABILITY OF TERRAIN

element TerrainCharacteristics/FEATURES

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Convex Roll(s)
enumeration	Series of Convex Rolls
enumeration	Concave Slope
enumeration	Broad Open Basin
enumeration	Gully(s)
enumeration	Steep Slope
enumeration	Short, Steep Slope
enumeration	Terrain Trap
enumeration	Cliff Band
enumeration	Cliff Cookie/Boulder Mushroom
enumeration	Morraine
enumeration	Shoulder
enumeration	Planar Slope
enumeration	Man-made Slope (mine tailings, etc)
enumeration	Icefall/Seracs
enumeration	Boulder Field(s)
enumeration	Grass/Shale Slope
enumeration	Rock Slab
enumeration	Glide Slope
enumeration	Glacier/Firn
enumeration	Open Slope
enumeration	Sparse Forest
enumeration	Dense Forest
enumeration	Burned Area
enumeration	Cut Block

annotation

documentation

FEATURES (SHAPE, GROUND AND FOREST COVER)

element TerrainCharacteristics/HISTORY

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Previously Skied
enumeration	Heavily Skied
enumeration	Previously Controlled with Results
enumeration	Previously Controlled without Results
enumeration	Previously Slid

annotation

documentation

USAGE HISTORY

element TerrainCharacteristics/RELATIVE_LOC

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Within Ski Area
enumeration	Adjacent to Ski Area
enumeration	Ski Run
enumeration	Adjacent to Ski Run
enumeration	Not on Ski Run
enumeration	Climbing Route
enumeration	Adjacent to Climbing Route

annotation

documentation

RELATIVE LOCATION WITH RESPECT TO USAGE

group TerrainFeatures

diagram

namespace

http://www.avalanche.ca/caaml

children

VEGETATION_BAND WIND_EXP SOLAR_EXP SKIABLE FEATURES HISTORY RELATIVE_LOC COMMENT

annotation

documentation

Group of descriptive terrain features including related enumerations

element TerrainFeatures/VEGETATION_BAND

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Alpine
enumeration	Treeline
enumeration	Below Treeline

annotation

documentation

VEGETATION BAND

element TerrainFeatures/WIND_EXP

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Windward Slope(s)
enumeration	Lee Slope(s)
enumeration	Cross-loaded Slope
enumeration	Wind Pillow
enumeration	Down Flow

annotation

documentation

EXPOSURE TO WIND (TRANSPORT)

element TerrainFeatures/SOLAR_EXP

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Solar Aspect(s)
enumeration	Shaded Solar Aspect(s)
enumeration	Non-Solar Aspect(s)

annotation

documentation

EXPOSURE TO SOLAR RADIATION

element TerrainFeatures/SKIABLE

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Y
enumeration	N
enumeration	N-Y
enumeration	Yes
enumeration	No
enumeration	No-Yes

annotation

documentation

SKIABILITY OF TERRAIN

element TerrainFeatures/FEATURES

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Convex Roll(s)
enumeration	Series of Convex Rolls
enumeration	Concave Slope
enumeration	Broad Open Basin
enumeration	Gully(s)
enumeration	Steep Slope
enumeration	Short, Steep Slope
enumeration	Terrain Trap
enumeration	Cliff Band
enumeration	Cliff Cookie/Boulder Mushroom
enumeration	Morraine
enumeration	Shoulder
enumeration	Planar Slope
enumeration	Man-made Slope (mine tailings, etc)
enumeration	Icefall/Seracs
enumeration	Boulder Field(s)
enumeration	Grass/Shale Slope
enumeration	Rock Slab
enumeration	Glide Slope
enumeration	Glacier/Firn
enumeration	Open Slope
enumeration	Sparse Forest
enumeration	Dense Forest
enumeration	Burned Area
enumeration	Cut Block

annotation

documentation

FEATURES (SHAPE, GROUND AND FOREST COVER)

element TerrainFeatures/HISTORY

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Previously Skied
enumeration	Heavily Skied
enumeration	Previously Controlled with Results
enumeration	Previously Controlled without Results
enumeration	Previously Slid

annotation

documentation

USAGE HISTORY

element TerrainFeatures/RELATIVE_LOC

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	Within Ski Area
enumeration	Adjacent to Ski Area
enumeration	Ski Run
enumeration	Adjacent to Ski Run
enumeration	Not on Ski Run
enumeration	Climbing Route
enumeration	Adjacent to Climbing Route

annotation

documentation

RELATIVE LOCATION WITH RESPECT TO USAGE

group TerrainParameters

diagram

namespace

http://www.avalanche.ca/caaml

children

ASPECT ELEVATION INCLINE POSITION

annotation

documentation

Group of numerical terrain parameters

element TerrainParameters/ASPECT

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

ASPECT (RANGE)

element TerrainParameters/ASPECT/FROM

diagram

namespace

http://www.avalanche.ca/caaml

type

DirectionCardinal

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	N
enumeration	NNE
enumeration	NE
enumeration	ENE
enumeration	E
enumeration	ESE
enumeration	SE
enumeration	SSE
enumeration	S
enumeration	SSW
enumeration	SW
enumeration	WSW
enumeration	W
enumeration	WNW
enumeration	NW
enumeration	NNW
enumeration	VAR
enumeration	ALL

annotation

documentation

MAIN  ASPECT ELEMENT

element TerrainParameters/ASPECT/TO

diagram

namespace

http://www.avalanche.ca/caaml

type

DirectionCardinal

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	N
enumeration	NNE
enumeration	NE
enumeration	ENE
enumeration	E
enumeration	ESE
enumeration	SE
enumeration	SSE
enumeration	S
enumeration	SSW
enumeration	SW
enumeration	WSW
enumeration	W
enumeration	WNW
enumeration	NW
enumeration	NNW
enumeration	VAR
enumeration	ALL

annotation

documentation

END OF ASPECT RANGE

element TerrainParameters/ELEVATION

diagram

namespace

http://www.avalanche.ca/caaml

type

ElevationRange

properties

isRef	0
content	complex

children

MIN MAX

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m

annotation

documentation

ELEVATION (RANGE)

element TerrainParameters/INCLINE

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

INCLINE (RANGE)

element TerrainParameters/INCLINE/MIN

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

properties

isRef	0
content	simple
nillable	true

facets

minInclusive	0
maxInclusive	90

annotation

documentation

MINIMUM OF INCLINE RANGE

element TerrainParameters/INCLINE/MAX

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

properties

isRef	0
content	simple
nillable	true

facets

minInclusive	0
maxInclusive	90

annotation

documentation

MAXIMUM OF INCLINE RANGE

element TerrainParameters/POSITION

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

RELATIVE POSITION (RANGE)

element TerrainParameters/POSITION/FROM

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	T
enumeration	M
enumeration	B
enumeration	U

annotation

documentation

BOTTOM OF RANGE

element TerrainParameters/POSITION/TO

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	B
enumeration	M
enumeration	T
enumeration	U

annotation

documentation

TOP OF RANGE

complexType AbstractLocationCollectionType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:AbstractFeatureCollectionType

properties

base	gml:AbstractFeatureCollectionType

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location gml:featureMember gml:featureMembers

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Abstract location collection type definition for location collections not included in location catalog

complexType AbstractLocationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:AbstractFeatureType

properties

base	gml:AbstractFeatureType
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location

used by

complexTypes

AbstractLocationTypeLocCatalog DepositType FractureLineType StartingZoneType TriggerPointType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Abstract location type definition derived from gml:AbstractFeatureType

complexType AbstractLocationTypeLocCatalog

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationType

properties

base	AbstractLocationType

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

used by

element	_LOCATION_CATALOG_ELEMENT
complexTypes	AvPathType ForecastAreaType GenericLocationType MtnRangeType OperatingZoneType OperationLocationType SkiRunType WxSiteType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Abstract location type definition for location elements included in location catalog

complexType AvalancheType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationCollectionType

properties

base	AbstractLocationCollectionType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element AvalancheType/LOC_CHILDREN

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

DEPOSIT FRACTURE_LINE STARTING_ZONE TRIGGER_POINT

element AvalancheType/LENGTH_RUN

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ValueRangeNonNegativeInteger

properties

isRef	0
content	complex

DESCRIPTION OF MEASUREMENT TYPE

annotation

documentation

LENGTH OF PATH RUN (OGRS 3.4.11)

complexType AvPathType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationTypeLocCatalog

properties

base	AbstractLocationTypeLocCatalog

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType DepositType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationType

properties

base	AbstractLocationType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element DepositType/DEPOSIT_ROAD_LENGTH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeInt

properties

isRef	0
content	complex

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

LENGTH OF DEPOSIT ON THE ROAD (OGRS 3.4.7)

element DepositType/DEPOSIT_ROAD_DEPTH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeDecimal

properties

isRef	0
content	complex

facets

minInclusive	0
fractionDigits	1

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

DEPTH OF DEPOSITE ON THE ROAD (OGRS 3.4.7)

element DepositType/DISTANCE_ROAD_TOE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeInt

properties

isRef	0
content	complex

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

DISTANCE TO TOE OF DEPOSITED MASS (OGRS 3.4.8)

element DepositType/DEPOSIT_WIDTH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ValueRangeNonNegativeInteger

properties

isRef	0
content	complex

children

MIN MAX

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

AVERAGE WIDTH OF DEPOSIT (OGRS 3.4.9)

element DepositType/DEPOSIT_LENGTH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ValueRangeNonNegativeInteger

properties

isRef	0
content	complex

children

MIN MAX

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

AVERAGE LENGTH OF DEPOSIT (OGRS 3.4.9)

complexType Elevation

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ElevValue

WxSiteType/ELEVATION WeatherObservationType/ELEVATION SkyCondition/VF

facets

minInclusive	-1312
maxInclusive	29145

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m

annotation

documentation

Includes units attribute for elevation value

complexType ElevationRange

diagram

namespace

http://www.avalanche.ca/caaml

FieldObservationType/ELEVATION TerrainCharacteristics/ELEVATION TerrainParameters/ELEVATION

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m

annotation

documentation

Describes an elevation range. If only one value is given, it is required in the MIN element.

element ElevationRange/MIN

diagram

namespace

http://www.avalanche.ca/caaml

type

ElevValue

properties

isRef	0
content	simple
nillable	true

facets

minInclusive	-1312
maxInclusive	29145

annotation

documentation

MINIMUM OF ELEVATION RANGE

element ElevationRange/MAX

diagram

namespace

http://www.avalanche.ca/caaml

type

ElevValue

properties

isRef	0
content	simple
nillable	true

facets

minInclusive	-1312
maxInclusive	29145

annotation

documentation

MAXIMUM OF ELEVATION RANGE

complexType ForecastAreaType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationTypeLocCatalog

properties

base	AbstractLocationTypeLocCatalog

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType FractureLineType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationType

properties

base	AbstractLocationType

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType GenericLocationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationTypeLocCatalog

properties

base	AbstractLocationTypeLocCatalog

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType LocationChildGenericType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:AssociationType

properties

base	gml:AssociationType

LocationChildrenType/AV_PATH LocationChildrenType/FORECAST_AREA LocationChildrenType/GENERIC LocationChildrenType/OPERATING_ZONE LocationChildrenType/OPERATION_LOCATION LocationChildrenType/SKI_RUN LocationChildrenType/WX_SITE


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Type definition of location reference for location relationship

complexType LocationChildMtnRangeType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:AssociationType

properties

base	gml:AssociationType

children

gml:_Object LOC_NAME LOC_DESCRIPTION LOC_ABBREV COMMENT

used by

element

LocationChildrenType/MTN_RANGE


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Type definition of location reference of mountain range parent/child

element LocationChildMtnRangeType/LOC_NAME

diagram

namespace

http://www.avalanche.ca/caaml

type

MtnRangeEnum

properties

isRef	0
content	simple

annotation

documentation

Enumerations of Mountain Ranges

complexType LocationChildrenType

diagram

namespace

http://www.avalanche.ca/caaml

children

AV_PATH FORECAST_AREA GENERIC MTN_RANGE OPERATING_ZONE OPERATION_LOCATION SKI_RUN WX_SITE

Type definition for location children element

element LocationChildrenType/AV_PATH

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationChildGenericType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Avalanche path location reference

element LocationChildrenType/FORECAST_AREA

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationChildGenericType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Forecast area location reference

element LocationChildrenType/GENERIC

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationChildGenericType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Generic reference

element LocationChildrenType/MTN_RANGE

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationChildMtnRangeType

properties

isRef	0
content	complex

children

gml:_Object LOC_NAME LOC_DESCRIPTION LOC_ABBREV COMMENT


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Mountain range location reference

element LocationChildrenType/OPERATING_ZONE

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationChildGenericType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Operating zone location reference

element LocationChildrenType/OPERATION_LOCATION

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationChildGenericType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Operation location location reference

element LocationChildrenType/SKI_RUN

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationChildGenericType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Ski run location reference

element LocationChildrenType/WX_SITE

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationChildGenericType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Weather site location reference

complexType LocationParentGenericType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:AssociationType

properties

base	gml:AssociationType
abstract	true

children

gml:_Object LOC_NAME LOC_DESCRIPTION LOC_ABBREV COMMENT

used by

element

LocationParentsType/GENERIC


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Type definition of location reference of generic parent/child

complexType LocationParentMtnRangeType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:AssociationType

properties

base	gml:AssociationType
abstract	true

children

gml:_Object LOC_NAME LOC_DESCRIPTION LOC_ABBREV COMMENT

used by

element

LocationParentsType/MTN_RANGE


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Type definition of location reference of mountain range parent/child

element LocationParentMtnRangeType/LOC_NAME

diagram

namespace

http://www.avalanche.ca/caaml

type

MtnRangeEnum

properties

isRef	0
content	simple

annotation

documentation

Enumerations of Mountain Ranges

complexType LocationParentsType

diagram

namespace

http://www.avalanche.ca/caaml

Type definition for location parents element

element LocationParentsType/GENERIC

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationParentGenericType

properties

isRef	0
content	complex

children

gml:_Object LOC_NAME LOC_DESCRIPTION LOC_ABBREV COMMENT


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Generic Grouping

element LocationParentsType/MTN_RANGE

diagram

namespace

http://www.avalanche.ca/caaml

type

LocationParentMtnRangeType

properties

isRef	0
content	complex

children

gml:_Object LOC_NAME LOC_DESCRIPTION LOC_ABBREV COMMENT


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Mount Range Grouping

complexType LocationReferenceType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:AssociationType

properties

base	gml:AssociationType

children

gml:_Object LOC_NAME LOC_DESCRIPTION LOC_ABBREV LOC_PARENTS STATUS


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Type definition of location reference

element LocationReferenceType/STATUS

diagram

namespace

http://www.avalanche.ca/caaml

Status of location reference for avalanche observations

complexType MtnRangeType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationTypeLocCatalog

properties

base	AbstractLocationTypeLocCatalog

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType OperatingZoneType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationTypeLocCatalog

properties

base	AbstractLocationTypeLocCatalog

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType OperationLocationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationTypeLocCatalog

properties

base	AbstractLocationTypeLocCatalog

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType SkiRunType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationTypeLocCatalog

properties

base	AbstractLocationTypeLocCatalog

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType StartingZoneType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationType

properties

base	AbstractLocationType

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location ASPECT ELEVATION INCLINE POSITION VEGETATION_BAND WIND_EXP SOLAR_EXP SKIABLE FEATURES HISTORY RELATIVE_LOC COMMENT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType TriggerPointType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationType

properties

base	AbstractLocationType

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location ASPECT ELEVATION INCLINE POSITION VEGETATION_BAND WIND_EXP SOLAR_EXP SKIABLE FEATURES HISTORY RELATIVE_LOC COMMENT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType WxSiteType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractLocationTypeLocCatalog

properties

base	AbstractLocationTypeLocCatalog

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location LOC_ABBREV LOC_PARENTS LOC_CHILDREN ELEVATION WX_SITE_TYPE

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element WxSiteType/ELEVATION

diagram

namespace

http://www.avalanche.ca/caaml

type

Elevation

properties

isRef	0
content	complex

facets

minInclusive	-1312
maxInclusive	29145

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m

annotation

documentation

Site Elevation

element WxSiteType/WX_SITE_TYPE

diagram

namespace

http://www.avalanche.ca/caaml

type

MeasTypeWx

properties

isRef	0
content	simple

facets

enumeration	MAN
enumeration	AUTO

annotation

documentation

Type of Weather Observation type

simpleType DirectionCardinal

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements

Wind/DIRECTION/CARDINAL TerrainCharacteristics/ASPECT/FROM TerrainParameters/ASPECT/FROM TerrainCharacteristics/ASPECT/TO TerrainParameters/ASPECT/TO Xport/XPDIR

facets

enumeration	~
enumeration	N
enumeration	NNE
enumeration	NE
enumeration	ENE
enumeration	E
enumeration	ESE
enumeration	SE
enumeration	SSE
enumeration	S
enumeration	SSW
enumeration	SW
enumeration	WSW
enumeration	W
enumeration	WNW
enumeration	NW
enumeration	NNW
enumeration	VAR
enumeration	ALL

annotation

documentation

Enumerations for cardinal directions

simpleType ElevValue

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

used by

elements	ElevationRange/MAX ElevationRange/MIN
complexType	Elevation

facets

minInclusive	-1312
maxInclusive	29145

annotation

documentation

Limits Integer values to resonable elevation values

simpleType MtnRangeEnum

namespace

http://www.avalanche.ca/caaml

type

union of (restriction of xs:string, NoEmptyString)

used by

elements

LocationChildMtnRangeType/LOC_NAME LocationParentMtnRangeType/LOC_NAME

annotation

documentation

Enumerations currently used in InfoEx reports

simpleType Status

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

facets

enumeration	Open
enumeration	Closed
enumeration	Red
enumeration	Yellow
enumeration	Green
enumeration	R
enumeration	Y
enumeration	G

annotation

documentation

Enumeration for STATUS element of location references for avalanche observations

attributeGroup LocationChildAttributeGroup

namespace

http://www.avalanche.ca/caaml

used by

complexTypes

LocationChildGenericType LocationChildMtnRangeType

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
LOC_ID	IDType	required
GROUP_DESCR	NoEmptyString	optional
CHILD_SORT_KEY	NoEmptyString	optional

attributeGroup LocationParentAttributeGroup

namespace

http://www.avalanche.ca/caaml

used by

complexTypes

LocationParentGenericType LocationParentMtnRangeType

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
LOC_ID	IDType	optional
GROUP_DESCR	NoEmptyString	optional
LOC_SORT_KEY	NoEmptyString	optional

element _OBSERVATION

diagram

namespace

http://www.avalanche.ca/caaml

type

AbstractObservationType

properties

content	complex
substGrp	gml:_Feature

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT

used by

element

CAAMLRootElementType/OPERATION/DATE_OBS

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Abstract global generic observation element

element AV_ACTIVITY

diagram

namespace

http://www.avalanche.ca/caaml

type

AvalancheActivityObservationType

properties

content	complex
substGrp	_OBSERVATION

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_OBS REPORT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Avalanche activity observation element

element AV_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

AvalancheObservationType

properties

content	complex
substGrp	_OBSERVATION

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE DATE_OCCUR TIME_OCCUR TIME_OCCUR_RANGE NUM_OCCUR AV_SIZE TYPE LWC TERMINUS TRIGGER FAILURE_PLANE SLAB_WIDTH SLAB_THICK DEPOSIT_ROAD_LENGTH DEPOSIT_ROAD_DEPTH DISTANCE_ROAD_TOE DEPOSIT_WIDTH DEPOSIT_LENGTH LENGTH_RUN AVALANCHE

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Avalanche observation element

element BULLETIN

diagram

namespace

http://www.avalanche.ca/caaml

type

BulletinType

properties

content	complex
substGrp	_OBSERVATION

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE FORECASTER SPONSOR VALID_DATE VALID_TIME TYPE RAA_RATING RAA_DESCRIPTION RAA_RATING_24 RAA_RATING_48 RAA_RATING_72 RAA_REMARK DNGR_ALP DNGR_ALP_REMARK DNGR_TL DNGR_TL_REMARK DNGR_BTL DNGR_BTL_REMARK DNGR_REMARK TRAVEL_ADVISORY OUTLOOK SOAPBOX RELATED_OBS

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Avalanche bulletin element

element EXT_DATA

diagram

namespace

http://www.avalanche.ca/caaml

type

ExternalDataType

properties

content	complex
substGrp	_OBSERVATION

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE EXT_TYPE TITLE SUMMARY

used by

element

CAAMLRootElementType/OPERATION

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

External data element

element FIELD_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

FieldObservationType

properties

content	complex
substGrp	_OBSERVATION

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Field observation element

element SNOWPACK_STRUCTURE

diagram

namespace

http://www.avalanche.ca/caaml

type

SnowpackStructureObservationType

properties

content	complex
substGrp	_OBSERVATION

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_OBS REPORT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Snowpack structure observation element

element SNOWPPROFILE

diagram

namespace

http://www.avalanche.ca/caaml

type

SnowprofileObservationType

properties

content	complex
substGrp	_OBSERVATION

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_OBS

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Snow profile observation element

element STABILITY

diagram

namespace

http://www.avalanche.ca/caaml

type

StabilityObservationType

properties

content	complex
substGrp	_OBSERVATION

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_RTG STB_ALP STB_ALP_REMARK STB_TL STB_TL_REMARK STB_BTL STB_BTL_REMARK STB_REMARK

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Stability observation element

element WX_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

WeatherObservationType

properties

content	complex
substGrp	_OBSERVATION

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_OBS ELEVATION SKY_COND PRECIP_TI AIR_TEMP_PRES AIR_TEMP_MAX AIR_TEMP_MIN AIR_TEMP_TREND SNOW_TEMP_10 RH HIN HN24 H2D HST HIT HSB HS RAIN_GAUGE PRECIP_GAUGE_ACCUM PENETRATION_RAM PENETRATION_FOOT PENETRATION_SKI SURFACE WIND XPORT BARO_PRESSURE BARO_TREND

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Weather observation element

element WX_SYNOPSIS

diagram

namespace

http://www.avalanche.ca/caaml

type

WeatherSynopsisObservationType

properties

content	complex
substGrp	_OBSERVATION

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_OBS REPORT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Weather synopsis observation element

complexType AbstractObservationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:AbstractFeatureType

properties

base	gml:AbstractFeatureType

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT

used by

element	_OBSERVATION
complexTypes	AbstractObservationTypeMultiLocRef AbstractObservationTypeOptionalMultiLocRef AbstractObservationTypeSingleLocRef

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

 Basic abstract observation type

element AbstractObservationType/TIME_REPORT

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeValue

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

annotation

documentation

Time of report

complexType AbstractObservationTypeMultiLocRef

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationType

properties

base	AbstractObservationType
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE

used by

complexTypes

AvalancheActivityObservationType AvalancheObservationType BulletinType FieldObservationType SnowpackStructureObservationType StabilityObservationType WeatherSynopsisObservationType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Abstract observation type with unbound required locations

complexType AbstractObservationTypeOptionalMultiLocRef

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationType

properties

base	AbstractObservationType
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Abstract observation type with unbound optional locations

complexType AbstractObservationTypeSingleLocRef

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationType

properties

base	AbstractObservationType
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE

used by

complexTypes

SnowprofileObservationType WeatherObservationType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Abstract observation type with a single required location

complexType AvalancheActivityObservationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeMultiLocRef

properties

base	AbstractObservationTypeMultiLocRef

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_OBS REPORT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element AvalancheActivityObservationType/TIME_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeRangeStartEnd

properties

isRef	0
content	complex

children

FROM TO

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

complexType AvalancheObservationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeMultiLocRef

properties

base	AbstractObservationTypeMultiLocRef

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element AvalancheObservationType/DATE_OCCUR

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:date

properties

isRef	0
content	simple

element AvalancheObservationType/TIME_OCCUR

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeValue

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

element AvalancheObservationType/TIME_OCCUR_RANGE

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeRangeHours

properties

isRef	0
content	simple

facets

minInclusive	0
pattern	0.0
pattern	0.5
pattern	.5
pattern	\d+
pattern	\d+.0

complexType BulletinType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeMultiLocRef

properties

base	AbstractObservationTypeMultiLocRef

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element BulletinType/FORECASTER

diagram

namespace

http://www.avalanche.ca/caaml

type

PersonBase

properties

isRef	0
content	complex

children

FIRST_NAME LAST_NAME INITIALS

attributes

Name	Type	Use	Default	Fixed	Annotation
PERS_ID	IDType	optional
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

ISSUING FORECASTER

element BulletinType/SPONSOR

diagram

namespace

http://www.avalanche.ca/caaml

type

OperationReference

properties

isRef	0
content	complex

children

NAME ABBREV LOGO

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

SPONSOR OF BULLETIN

element BulletinType/VALID_DATE

diagram

namespace

http://www.avalanche.ca/caaml

type

DateValidForecast

properties

isRef	0
content	simple

annotation

documentation

END OF BULLETIN DATE

element BulletinType/VALID_TIME

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeValue

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

annotation

documentation

END OF BULLETIN TIME

element BulletinType/RELATED_OBS

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

AV_ACTIVITY AV_OBS SNOWPACK_STRUCTURE WX_OBS WX_SYNOPSIS

annotation

documentation

Related observations

element BulletinType/RELATED_OBS/AV_ACTIVITY

diagram

namespace

http://www.avalanche.ca/caaml

type

ObservationAssociationType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element BulletinType/RELATED_OBS/AV_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

ObservationAssociationType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element BulletinType/RELATED_OBS/SNOWPACK_STRUCTURE

diagram

namespace

http://www.avalanche.ca/caaml

type

ObservationAssociationType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element BulletinType/RELATED_OBS/WX_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

ObservationAssociationType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element BulletinType/RELATED_OBS/WX_SYNOPSIS

diagram

namespace

http://www.avalanche.ca/caaml

type

ObservationAssociationType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType ExternalDataType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeOptionalMultiLocRef

properties

base	AbstractObservationTypeOptionalMultiLocRef

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE EXT_TYPE TITLE SUMMARY

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element ExternalDataType/EXT_TYPE

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

POINTER TO EXTENSTION_DEF FOR FILE PROCESSING INFORMATION

element ExternalDataType/TITLE

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

EXPLANATORY TITLE OF  TEXT MESSAGE OR FILE

element ExternalDataType/SUMMARY

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

TEXT MESSAGE OR SHORT TEXT SUMMARY OF FILE CONTENT

complexType FieldObservationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeMultiLocRef

properties

base	AbstractObservationTypeMultiLocRef

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element FieldObservationType/TIME_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeRangeStartEnd

properties

isRef	0
content	complex

children

FROM TO

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

element FieldObservationType/ELEVATION

diagram

namespace

http://www.avalanche.ca/caaml

type

ElevationRange

properties

isRef	0
content	complex

children

MIN MAX

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m

complexType ObservationAssociationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of gml:AssociationType

properties

base	gml:AssociationType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Abstract observation association type

complexType SnowpackStructureObservationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeMultiLocRef

properties

base	AbstractObservationTypeMultiLocRef

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_OBS REPORT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element SnowpackStructureObservationType/TIME_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeRangeStartEnd

properties

isRef	0
content	complex

children

FROM TO

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

complexType SnowprofileObservationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeSingleLocRef

properties

base	AbstractObservationTypeSingleLocRef

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_OBS

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element SnowprofileObservationType/TIME_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeValue

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

complexType StabilityObservationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeMultiLocRef

properties

base	AbstractObservationTypeMultiLocRef

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element StabilityObservationType/TIME_RTG

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeRangeStartEnd

properties

isRef	0
content	complex

children

FROM TO

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

annotation

documentation

Time range for rating

complexType WeatherObservationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeSingleLocRef

properties

base	AbstractObservationTypeSingleLocRef

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element WeatherObservationType/TIME_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeValue

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

annotation

documentation

Time of Observation

element WeatherObservationType/ELEVATION

diagram

namespace

http://www.avalanche.ca/caaml

type

Elevation

properties

isRef	0
content	complex

facets

minInclusive	-1312
maxInclusive	29145

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m

annotation

documentation

Elevation if different from or different from specifications in location record

complexType WeatherSynopsisObservationType

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of AbstractObservationTypeMultiLocRef

properties

base	AbstractObservationTypeMultiLocRef

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location DISCLAIMER COMMENT TIME_REPORT LOCATION_REFERENCE TIME_OBS REPORT

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element WeatherSynopsisObservationType/TIME_OBS

diagram

namespace

http://www.avalanche.ca/caaml

type

TimeRangeStartEnd

properties

isRef	0
content	complex

children

FROM TO

attributes

Name	Type	Use	Default	Fixed	Annotation
TIME_ZONE	TimeZoneEnum	optional

annotation

documentation

Time of Observation

attributeGroup ObservationAttributeGroup

namespace

http://www.avalanche.ca/caaml

used by

complexType

AbstractObservationType

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
ID	IDType	required
PRIVACY	PrivacyLevel	optional
IMPORTANCE		optional	3

annotation

documentation

Group of standard observation attributes

group ObsParametersAv

diagram

namespace

http://www.avalanche.ca/caaml

children

NUM_OCCUR AV_SIZE TYPE LWC TERMINUS TRIGGER FAILURE_PLANE SLAB_WIDTH SLAB_THICK DEPOSIT_ROAD_LENGTH DEPOSIT_ROAD_DEPTH DISTANCE_ROAD_TOE DEPOSIT_WIDTH DEPOSIT_LENGTH LENGTH_RUN AVALANCHE

used by

complexType

AvalancheObservationType

annotation

documentation

Avalanche observations

element ObsParametersAv/NUM_OCCUR

diagram

namespace

http://www.avalanche.ca/caaml

type

AvNum

properties

isRef	0
content	simple
default	1
nillable	true

annotation

documentation

NUMBER OF AVALANCHES OBSERVED

element ObsParametersAv/AV_SIZE

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

AVALANCHE SIZE (OGRS 3.3.5)

element ObsParametersAv/AV_SIZE/MIN

diagram

namespace

http://www.avalanche.ca/caaml

type

AvSize

properties

isRef	0
content	simple
nillable	true

facets

enumeration	0
enumeration	0.5
enumeration	1
enumeration	1.5
enumeration	2
enumeration	2.5
enumeration	3
enumeration	3.5
enumeration	4
enumeration	4.5
enumeration	5

annotation

documentation

MINIMUM SIZE

element ObsParametersAv/AV_SIZE/MAX

diagram

namespace

http://www.avalanche.ca/caaml

type

AvSize

properties

isRef	0
content	simple
nillable	true

facets

enumeration	0
enumeration	0.5
enumeration	1
enumeration	1.5
enumeration	2
enumeration	2.5
enumeration	3
enumeration	3.5
enumeration	4
enumeration	4.5
enumeration	5

annotation

documentation

MAXIMUM SIZE

element ObsParametersAv/TYPE

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	S
enumeration	L
enumeration	U

annotation

documentation

TYPE OF SNOW FAILURE (OGRS 3.3.6)

element ObsParametersAv/LWC

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

LIQUID WATER CONTENT  (OGRS 3.3.7)

element ObsParametersAv/LWC/STARTZONE

diagram

namespace

http://www.avalanche.ca/caaml

type

AvMoisture

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	D
enumeration	M
enumeration	W
enumeration	U

annotation

documentation

LWC IN STARTING  ZONE

element ObsParametersAv/LWC/DEPOSIT

diagram

namespace

http://www.avalanche.ca/caaml

type

AvMoisture

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	D
enumeration	M
enumeration	W
enumeration	U

annotation

documentation

LWC OF DEPOSIT

element ObsParametersAv/TERMINUS

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	SZ
enumeration	TK
enumeration	TR
enumeration	MR
enumeration	BR
enumeration	U
enumeration	TP
enumeration	MP
enumeration	BP
enumeration	1F
enumeration	2F
enumeration	3F

annotation

documentation

TERMINUS (OGRS 3.3.8)

element ObsParametersAv/TRIGGER

diagram

namespace

http://www.avalanche.ca/caaml

type

AvTrigger

properties

isRef	0
content	complex

AVALANCHE TRIGGER (OGRS 3.3.9)

element ObsParametersAv/FAILURE_PLANE

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

BED_SURF_LEVEL WEAK_LAYER_FORM BED_SURFACE_FORM DATE_OF_BURIAL

annotation

documentation

BED SURFACE  CHARACTERISTICS (ORGS 3.4.4)

element ObsParametersAv/FAILURE_PLANE/BED_SURF_LEVEL

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	S
enumeration	O
enumeration	G
enumeration	U

annotation

documentation

LEVEL OF BED SURFACE

element ObsParametersAv/FAILURE_PLANE/WEAK_LAYER_FORM

diagram

namespace

http://www.avalanche.ca/caaml

type

GrainTypeSize

properties

isRef	0
content	complex

children

GRAIN_TYPE GRAIN_SIZE

annotation

documentation

FORM AND SIZE OF WEAK LAYER CRYSTALS (NOT OGRS CONFORM)

element ObsParametersAv/FAILURE_PLANE/BED_SURFACE_FORM

diagram

namespace

http://www.avalanche.ca/caaml

type

GrainTypeSize

properties

isRef	0
content	complex

children

GRAIN_TYPE GRAIN_SIZE

annotation

documentation

FORM AND SIZE OF BED SURFACE CRYSTALS (NOT OGRS CONFORM)

element ObsParametersAv/FAILURE_PLANE/DATE_OF_BURIAL

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:date

properties

isRef	0
content	simple
nillable	true

annotation

documentation

DATE OF FAILURE PLANE BURIAL

element ObsParametersAv/SLAB_WIDTH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ValueRangeNonNegativeInteger

properties

isRef	0
content	complex

DESCRIPTION OF MEASUREMENT TYPE

annotation

documentation

SLAB WIDTH (OGRS 3.4.5)

element ObsParametersAv/SLAB_THICK

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ValueRangeNonNegativeInteger

properties

isRef	0
content	complex

DESCRIPTION OF MEASUREMENT TYPE

annotation

documentation

SLAB THICKNESS (OGRS 3.4.6)

element ObsParametersAv/DEPOSIT_ROAD_LENGTH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeInt

properties

isRef	0
content	complex

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

LENGTH OF DEPOSIT ON THE ROAD (OGRS 3.4.7)

element ObsParametersAv/DEPOSIT_ROAD_DEPTH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeDecimal

properties

isRef	0
content	complex

facets

minInclusive	0
fractionDigits	1

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

DEPTH OF DEPOSITE ON THE ROAD (OGRS 3.4.7)

element ObsParametersAv/DISTANCE_ROAD_TOE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeInt

properties

isRef	0
content	complex

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

DISTANCE TO TOE OF DEPOSITED MASS (OGRS 3.4.8)

element ObsParametersAv/DEPOSIT_WIDTH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ValueRangeNonNegativeInteger

properties

isRef	0
content	complex

children

MIN MAX

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

AVERAGE WIDTH OF DEPOSIT (OGRS 3.4.9)

element ObsParametersAv/DEPOSIT_LENGTH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ValueRangeNonNegativeInteger

properties

isRef	0
content	complex

children

MIN MAX

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m
MEASTYPE	MeasTypeAv	optional	ESTIM

annotation

documentation

AVERAGE LENGTH OF DEPOSIT (OGRS 3.4.9)

element ObsParametersAv/LENGTH_RUN

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ValueRangeNonNegativeInteger

properties

isRef	0
content	complex

DESCRIPTION OF MEASUREMENT TYPE

annotation

documentation

LENGTH OF PATH RUN (OGRS 3.4.11)

group ObsParametersDngr

diagram

namespace

http://www.avalanche.ca/caaml

children

DNGR_ALP DNGR_ALP_REMARK DNGR_TL DNGR_TL_REMARK DNGR_BTL DNGR_BTL_REMARK DNGR_REMARK

annotation

documentation

Danger rating

element ObsParametersDngr/DNGR_ALP

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingHazard

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	LOW
enumeration	MODERATE
enumeration	CONSIDERABLE
enumeration	HIGH
enumeration	EXTREME

annotation

documentation

DANGER RATING FOR ALPINE

element ObsParametersDngr/DNGR_ALP_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK WITH REGARD TO ALPINE DANGER RATING

element ObsParametersDngr/DNGR_TL

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingHazard

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	LOW
enumeration	MODERATE
enumeration	CONSIDERABLE
enumeration	HIGH
enumeration	EXTREME

annotation

documentation

DANGER RATING FOR TREELINE

element ObsParametersDngr/DNGR_TL_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK WITH REGARD TO TREELINE DANGER RATING

element ObsParametersDngr/DNGR_BTL

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingHazard

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	LOW
enumeration	MODERATE
enumeration	CONSIDERABLE
enumeration	HIGH
enumeration	EXTREME

annotation

documentation

DANGER RATING FOR BELOW TREELINE

element ObsParametersDngr/DNGR_BTL_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK WITH REGARD TO BELOW TREELINE DANGER RATING

element ObsParametersDngr/DNGR_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

annotation

documentation

GENERAL REMARK REGARDING DANGER RATING

group ObsParametersField

diagram

namespace

http://www.avalanche.ca/caaml

children

SKY_COND PRECIP_TI AIR_TEMP FIELD_HIN FIELD_HN24 FIELD_HST FIELD_HS SURFACE WIND XPORT

Field observations

element ObsParametersField/SKY_COND

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

AVERAGE OR RANGE OF OBSERVED SKY CONDITIONS

element ObsParametersField/SKY_COND/SKY_COND1

diagram

namespace

http://www.avalanche.ca/caaml

type

SkyCondition

properties

isRef	0
content	complex
nillable	true

children

SKY VF

element ObsParametersField/SKY_COND/SKY_COND2

diagram

namespace

http://www.avalanche.ca/caaml

type

SkyCondition

properties

isRef	0
content	complex
nillable	true

children

SKY VF

element ObsParametersField/PRECIP_TI

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

PRECIP_TI1 PRECIP_TI2

annotation

documentation

AVERAGE OR RANGE OF OBSERVED PRECIPITATION TYPES AND INTENSITIES

element ObsParametersField/PRECIP_TI/PRECIP_TI1

diagram

namespace

http://www.avalanche.ca/caaml

type

PrecipTypeIntensity

properties

isRef	0
content	simple
nillable	true

facets

pattern	~
pattern	S\-1
pattern	S\d{1,2}
pattern	R?S?
pattern	R[VLMH]
pattern	G
pattern	ZR
pattern	NIL

element ObsParametersField/PRECIP_TI/PRECIP_TI2

diagram

namespace

http://www.avalanche.ca/caaml

type

PrecipTypeIntensity

properties

isRef	0
content	simple
nillable	true

facets

pattern	~
pattern	S\-1
pattern	S\d{1,2}
pattern	R?S?
pattern	R[VLMH]
pattern	G
pattern	ZR
pattern	NIL

element ObsParametersField/AIR_TEMP

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

LO_TEMP HI_TEMP

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsTemperature	optional	C

annotation

documentation

AVERAGE OR RANGE OF OBSERVED AIR TEMPERATURES

element ObsParametersField/AIR_TEMP/LO_TEMP

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TempValue

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	-90
maxInclusive	60
fractionDigits	1

annotation

documentation

MINIMUM OF OBSERVED TEMPERATURE RANGE

element ObsParametersField/AIR_TEMP/HI_TEMP

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TempValue

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	-90
maxInclusive	60
fractionDigits	1

annotation

documentation

MAXIMUM OF OBSERVED TEMPERATURE RANGE

element ObsParametersField/FIELD_HIN

diagram

namespace

http://www.avalanche.ca/caaml

type

SnowHeight

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

annotation

documentation

AVERAGE NEW SNOW OBSERVED DURING OBSERVATION PERIOD

element ObsParametersField/FIELD_HN24

diagram

namespace

http://www.avalanche.ca/caaml

type

SnowHeight

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

annotation

documentation

AVERAGE 24-HOUR NEW SNOW OBSERVED

element ObsParametersField/FIELD_HST

diagram

namespace

http://www.avalanche.ca/caaml

type

SnowHeightIrregular

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

SPECIFIES DATE WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TIME WHEN SNOWBOARD WAS CLEARED LAST TIME

AVERAGE STROM SNOW  OBSERVED

element ObsParametersField/FIELD_HS

diagram

namespace

http://www.avalanche.ca/caaml

type

SnowHeight

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

annotation

documentation

AVERAGE  DEPTH OF SNOWPACK  OBSERVED

element ObsParametersField/SURFACE

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

FORM AND SIZE OF DOMINANT SURFACE SNOW TYPES

element ObsParametersField/SURFACE/FORM1

diagram

namespace

http://www.avalanche.ca/caaml

type

GrainTypeSize

properties

isRef	0
content	complex
nillable	true

children

GRAIN_TYPE GRAIN_SIZE

element ObsParametersField/SURFACE/FORM2

diagram

namespace

http://www.avalanche.ca/caaml

type

GrainTypeSize

properties

isRef	0
content	complex
nillable	true

children

GRAIN_TYPE GRAIN_SIZE

element ObsParametersField/WIND

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

AVERAGE OR RANGE OF WIND OBSERVED

element ObsParametersField/WIND/WIND1

diagram

namespace

http://www.avalanche.ca/caaml

type

Wind

properties

isRef	0
content	complex

children

SPEED DIRECTION

element ObsParametersField/WIND/WIND2

diagram

namespace

http://www.avalanche.ca/caaml

type

Wind

properties

isRef	0
content	complex

children

SPEED DIRECTION

element ObsParametersField/XPORT

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

AVERAGE OR RANGE OF BLOWING SNOW OBSERVED AT RIDGE TOPS

element ObsParametersField/XPORT/XPORT1

diagram

namespace

http://www.avalanche.ca/caaml

type

Xport

properties

isRef	0
content	complex
nillable	true

children

XPEXTENT XPDIR

element ObsParametersField/XPORT/XPORT2

diagram

namespace

http://www.avalanche.ca/caaml

type

Xport

properties

isRef	0
content	complex
nillable	true

children

XPEXTENT XPDIR

group ObsParametersReport

diagram

namespace

http://www.avalanche.ca/caaml

AvalancheActivityObservationType SnowpackStructureObservationType WeatherSynopsisObservationType

annotation

documentation

Generic Report

element ObsParametersReport/REPORT

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

annotation

documentation

General Field for Report

group ObsParametersSnowProfile

diagram

namespace

http://www.avalanche.ca/caaml

used by

complexType

SnowprofileObservationType

annotation

documentation

Snowprofile Observations

group ObsParametersStb

diagram

namespace

http://www.avalanche.ca/caaml

children

STB_ALP STB_ALP_REMARK STB_TL STB_TL_REMARK STB_BTL STB_BTL_REMARK STB_REMARK

used by

complexType

StabilityObservationType

annotation

documentation

Stability rating

element ObsParametersStb/STB_ALP

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingStability

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	VP
enumeration	VP-P
enumeration	P-VP
enumeration	P
enumeration	P-F
enumeration	F-P
enumeration	F
enumeration	F-G
enumeration	G-F
enumeration	G
enumeration	G-VG
enumeration	VG-G
enumeration	VG

annotation

documentation

STABILITY RATING FOR ALPINE

element ObsParametersStb/STB_ALP_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK WITH REGARD TO ALPINE STABILITY RATING

element ObsParametersStb/STB_TL

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingStability

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	VP
enumeration	VP-P
enumeration	P-VP
enumeration	P
enumeration	P-F
enumeration	F-P
enumeration	F
enumeration	F-G
enumeration	G-F
enumeration	G
enumeration	G-VG
enumeration	VG-G
enumeration	VG

annotation

documentation

STABILITY RATING FOR TREELINE

element ObsParametersStb/STB_TL_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK WITH REGARD TO TREELINE STABILITY RATING

element ObsParametersStb/STB_BTL

diagram

namespace

http://www.avalanche.ca/caaml

type

RatingStability

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	VP
enumeration	VP-P
enumeration	P-VP
enumeration	P
enumeration	P-F
enumeration	F-P
enumeration	F
enumeration	F-G
enumeration	G-F
enumeration	G
enumeration	G-VG
enumeration	VG-G
enumeration	VG

annotation

documentation

STABILITY RATING FOR BELOW TREELINE

element ObsParametersStb/STB_BTL_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple
nillable	true

annotation

documentation

SPECIFIC REMARK WITH REGARD TO BELOW TREELINE STABILITY RATING

element ObsParametersStb/STB_REMARK

diagram

namespace

http://www.avalanche.ca/caaml

GENERAL STABILIT REMARK

group ObsParametersWx

diagram

namespace

http://www.avalanche.ca/caaml

children

SKY_COND PRECIP_TI AIR_TEMP_PRES AIR_TEMP_MAX AIR_TEMP_MIN AIR_TEMP_TREND SNOW_TEMP_10 RH HIN HN24 H2D HST HIT HSB HS RAIN_GAUGE PRECIP_GAUGE_ACCUM PENETRATION_RAM PENETRATION_FOOT PENETRATION_SKI SURFACE WIND XPORT BARO_PRESSURE BARO_TREND

used by

complexType

WeatherObservationType

annotation

documentation

Weather observations

element ObsParametersWx/SKY_COND

diagram

namespace

http://www.avalanche.ca/caaml

type

SkyCondition

properties

isRef	0
content	complex

SKY CONDITIONS (OGRS  1.4.3)

element ObsParametersWx/PRECIP_TI

diagram

namespace

http://www.avalanche.ca/caaml

type

PrecipTypeIntensity

properties

isRef	0
content	simple
nillable	true

facets

pattern	~
pattern	S\-1
pattern	S\d{1,2}
pattern	R?S?
pattern	R[VLMH]
pattern	G
pattern	ZR
pattern	NIL

annotation

documentation

PRECIPITATION TYPE AND INTENSITY (OGRS 1.4.4)

element ObsParametersWx/AIR_TEMP_PRES

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TempValue

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	-90
maxInclusive	60
fractionDigits	1

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsTemperature	optional	C
MEASTYPE	MeasTypeWx	optional	MAN

annotation

documentation

PRESENT TEMPERATURE (OGRS 1.4.5)

element ObsParametersWx/AIR_TEMP_MAX

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TempValue

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	-90
maxInclusive	60
fractionDigits	1

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsTemperature	optional	C
MEASTYPE	MeasTypeWx	optional	MAN
INTERVAL	NonNegativeInt	optional	24

annotation

documentation

MAXIMUM TEMPERATURE (OGRS 1.4.5)

element ObsParametersWx/AIR_TEMP_MIN

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TempValue

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	-90
maxInclusive	60
fractionDigits	1

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsTemperature	optional	C
MEASTYPE	MeasTypeWx	optional	MAN
INTERVAL	NonNegativeInt	optional	24

annotation

documentation

MINIMUM TEMPERATURE (OGRS 1.4.5)

element ObsParametersWx/AIR_TEMP_TREND

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of Trend

properties

isRef	0
content	complex
nillable	true

facets

enumeration	RR
enumeration	R
enumeration	S
enumeration	F
enumeration	FR
enumeration	~

attributes

Name	Type	Use	Default	Fixed	Annotation
MEASTYPE	MeasTypeWx	optional	MAN

annotation

documentation

AIR TEMPERATURE TREND (OGRS 1.4.5)

element ObsParametersWx/SNOW_TEMP_10

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TempValue

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	-90
maxInclusive	60
fractionDigits	1

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsTemperature	optional	C
DEPTH	NonNegativeInt	required		10
DEPTH_UNITS	UnitsLengthSmall	required		cm
MEASTYPE	MeasTypeWx	optional	MAN

annotation

documentation

10cm SNOW TEMPERATURE T10 (OGRS 1.4.6)

element ObsParametersWx/RH

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of PercentValue

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	0
maxInclusive	100

attributes

Name	Type	Use	Default	Fixed	Annotation
MEASTYPE	MeasTypeWx	optional	MAN

annotation

documentation

RELATIVE HUMIDITY (OGRS 1.4.7)

element ObsParametersWx/HIN

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of SnowHeightIrregular

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

SPECIFIES DATE WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TIME WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

INTERVAL SNOW BOARD (OGRS 1.4.8, 10 and 11)

element ObsParametersWx/HN24

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of SnowHeight

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

24-HOUR SNOW BOARD (OGRS 1.4.8, 10 and 11)

element ObsParametersWx/H2D

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of SnowHeight

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

TWICE-A-DAY SNOW BOARD (OGRS 1.4.8, 10 and 11)

element ObsParametersWx/HST

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of SnowHeightIrregular

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

SPECIFIES DATE WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TIME WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

STORM SNOW BOARD (OGRS 1.4.8, 10 and 11)

element ObsParametersWx/HIT

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of SnowHeightIrregular

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

SPECIFIES DATE WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TIME WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

INTERMITTENT SNOW BOARD (OGRS 1.4.8, 10 and 11)

element ObsParametersWx/HSB

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of SnowHeightIrregular

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

SPECIFIES DATE WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TIME WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

SHOOT SNOW BOARD (OGRS 1.4.8, 10 and 11)

element ObsParametersWx/HS

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of SnowHeight

properties

isRef	0
content	complex

children

SNOW_HEIGHT WEIGHT W DENSITY

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

TOTAL DEPTH OF SNOWPACK (OGRS 1.4.9)

element ObsParametersWx/RAIN_GAUGE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeDecimal

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	0
fractionDigits	1

SPECIFIES MEASUREMENT INTERVAL

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

RAIN (OGRS 1.4.13)

element ObsParametersWx/PRECIP_GAUGE_ACCUM

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeDecimal

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	0
fractionDigits	1

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

PRECIPITATION (OGRS 1.4.14)

element ObsParametersWx/PENETRATION_RAM

diagram

namespace

http://www.avalanche.ca/caaml

type

Penetration

properties

isRef	0
content	complex
nillable	true

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthSmall	optional	cm

annotation

documentation

RAM PENETATION (OGRS 1.4.15)

element ObsParametersWx/PENETRATION_FOOT

diagram

namespace

http://www.avalanche.ca/caaml

type

Penetration

properties

isRef	0
content	complex
nillable	true

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthSmall	optional	cm

annotation

documentation

FOOT PENETATION (OGRS 1.4.15)

element ObsParametersWx/PENETRATION_SKI

diagram

namespace

http://www.avalanche.ca/caaml

type

Penetration

properties

isRef	0
content	complex
nillable	true

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthSmall	optional	cm

annotation

documentation

SKI PENETATION (OGRS 1.4.15)

element ObsParametersWx/SURFACE

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

FORM AND SIZE OF SURFACE SNOW (OGRS 1.4.16)

element ObsParametersWx/SURFACE/FORM_1

diagram

namespace

http://www.avalanche.ca/caaml

type

GrainTypeSize

properties

isRef	0
content	complex
nillable	true

children

GRAIN_TYPE GRAIN_SIZE

element ObsParametersWx/SURFACE/FORM_2

diagram

namespace

http://www.avalanche.ca/caaml

type

GrainTypeSize

properties

isRef	0
content	complex
nillable	true

children

GRAIN_TYPE GRAIN_SIZE

element ObsParametersWx/WIND

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of Wind

properties

isRef	0
content	complex

SPECIFIES TYPE OF MEASUREMENT (MANUAL OR AUTOMATIC)

annotation

documentation

WIND OBSERVATIONS (OGRS 1.4.17)

element ObsParametersWx/XPORT

diagram

namespace

http://www.avalanche.ca/caaml

type

Xport

properties

isRef	0
content	complex

BLOWING SNOW AT RIDGE TOPS (OGRS 1.4.18)

element ObsParametersWx/BARO_PRESSURE

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

ABSOLUTE RELATIVE

attributes

Name	Type	Use	Default	Fixed	Annotation
MEASTYPE	MeasTypeWx	optional	MAN

annotation

documentation

BAROMETRIC PRESSURE (OGRS 1.4.19)

element ObsParametersWx/BARO_PRESSURE/ABSOLUTE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeDecimal

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	0
fractionDigits	1

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsPressure	optional	kPa

element ObsParametersWx/BARO_PRESSURE/RELATIVE

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	H
enumeration	M
enumeration	L

element ObsParametersWx/BARO_TREND

diagram

namespace

http://www.avalanche.ca/caaml

type

Trend

properties

isRef	0
content	simple
nillable	true

facets

enumeration	RR
enumeration	R
enumeration	S
enumeration	F
enumeration	FR
enumeration	~

annotation

documentation

BAROMETRIC PRESSURE (OGRS 1.4.19)

complexType AvTrigger

diagram

namespace

http://www.avalanche.ca/caaml

ObsParametersAv/TRIGGER

annotation

documentation

Avalanche trigger enumerations

element AvTrigger/TYPE

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	N
enumeration	Na
enumeration	Nc
enumeration	Ne
enumeration	Ni
enumeration	Nr
enumeration	X
enumeration	Xa
enumeration	Xc
enumeration	Xcc
enumeration	Xe
enumeration	Xg
enumeration	Xh
enumeration	Xl
enumeration	Xp
enumeration	Xt
enumeration	Xr
enumeration	Xy
enumeration	H
enumeration	Ha
enumeration	Hc
enumeration	Hr
enumeration	Hy
enumeration	V
enumeration	Va
enumeration	Vr
enumeration	Vy
enumeration	S
enumeration	Sa
enumeration	Sc
enumeration	Sr
enumeration	Sy
enumeration	M
enumeration	Ma
enumeration	Mc
enumeration	Mr
enumeration	My
enumeration	U
enumeration	O

annotation

documentation

TRIGGER TYPE

element AvTrigger/DISTANCE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeInt

properties

isRef	0
content	complex
nillable	true

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m

annotation

documentation

TRIGGER DISTANCE FOR REMOTE AND SYMATHETIC

complexType GrainTypeSize

diagram

namespace

http://www.avalanche.ca/caaml

children

GRAIN_TYPE GRAIN_SIZE

used by

elements

ObsParametersAv/FAILURE_PLANE/BED_SURFACE_FORM ObsParametersField/SURFACE/FORM1 ObsParametersField/SURFACE/FORM2 ObsParametersWx/SURFACE/FORM_1 ObsParametersWx/SURFACE/FORM_2 ObsParametersAv/FAILURE_PLANE/WEAK_LAYER_FORM

annotation

documentation

Grain type (incl. sub types) and size enumarations

element GrainTypeSize/GRAIN_TYPE

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	PP
enumeration	PPcl
enumeration	PPnd
enumeration	PPpl
enumeration	PPsd
enumeration	PPir
enumeration	PPgp
enumeration	PPhl
enumeration	PPip
enumeration	DF
enumeration	DFdc
enumeration	DFbk
enumeration	RG
enumeration	RGsr
enumeration	RGlr
enumeration	RGmx
enumeration	FC
enumeration	FCfa
enumeration	FCsf
enumeration	FCmx
enumeration	DH
enumeration	DHcp
enumeration	DHdh
enumeration	DHcl
enumeration	WG
enumeration	WGcl
enumeration	WGmf
enumeration	WGsl
enumeration	SH
enumeration	SHsh
enumeration	SHch
enumeration	IM
enumeration	IMil
enumeration	IMic
enumeration	IMbi
enumeration	CR
enumeration	CRrm
enumeration	CRrc
enumeration	CRsc
enumeration	CRwc
enumeration	CRmfc

annotation

documentation

GRAIN TYPE INCLUDING SUBTYPES

element GrainTypeSize/GRAIN_SIZE

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

MIN MAX

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthSmall	optional	mm

annotation

documentation

GRAIN SIZE

element GrainTypeSize/GRAIN_SIZE/MIN

diagram

namespace

http://www.avalanche.ca/caaml

type

NonNegativeDecimal

properties

isRef	0
content	simple

facets

minInclusive	0
fractionDigits	1

element GrainTypeSize/GRAIN_SIZE/MAX

diagram

namespace

http://www.avalanche.ca/caaml

type

NonNegativeDecimal

properties

isRef	0
content	simple

facets

minInclusive	0
fractionDigits	1

complexType Penetration

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeInt

properties

base	NonNegativeInt

used by

elements

ObsParametersWx/PENETRATION_FOOT ObsParametersWx/PENETRATION_RAM ObsParametersWx/PENETRATION_SKI

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthSmall	optional	cm

annotation

documentation

Peneration observation type

complexType SkyCondition

diagram

namespace

http://www.avalanche.ca/caaml

ObsParametersWx/SKY_COND ObsParametersField/SKY_COND/SKY_COND1 ObsParametersField/SKY_COND/SKY_COND2

annotation

documentation

Sky condition enumeration

element SkyCondition/SKY

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	CLR
enumeration	FEW
enumeration	-FEW
enumeration	SCT
enumeration	-SCT
enumeration	BKN
enumeration	-BKN
enumeration	OVC
enumeration	-OVC
enumeration	X
enumeration	~

annotation

documentation

AMOUNT OF CLOUD COVER

element SkyCondition/VF

diagram

namespace

http://www.avalanche.ca/caaml

type

Elevation

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	-1312
maxInclusive	29145

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthIntermed	optional	m

annotation

documentation

TOP LEVEL OF VALLEY FOG

complexType SnowHeight

diagram

namespace

http://www.avalanche.ca/caaml

children

SNOW_HEIGHT WEIGHT W DENSITY

used by

elements	ObsParametersField/FIELD_HIN ObsParametersField/FIELD_HN24 ObsParametersField/FIELD_HS ObsParametersWx/H2D ObsParametersWx/HN24 ObsParametersWx/HS
complexType	SnowHeightIrregular

annotation

documentation

Snow height measurement type for regular intervals

element SnowHeight/SNOW_HEIGHT

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of SnowHeightValue

properties

isRef	0
content	complex
nillable	true

facets

minInclusive	0
pattern	(.1)
pattern	(0.1)
pattern	(\d{1,4}.0)
pattern	\d{1,4}

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthSmall	optional	cm

annotation

documentation

DEPTH OF SNOW

element SnowHeight/WEIGHT

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeInt

properties

isRef	0
content	complex
nillable	true

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
TUBE_DIAM	NonNegativeInt	required
TUBE_DIAM_UNITS	UnitsLengthSmall	optional	cm
UNITS	UnitsWeight	optional	g

annotation

documentation

WEIGHT OF NEW SNOW

element SnowHeight/W

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeFloat

properties

isRef	0
content	complex
nillable	true

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsLengthSmall	optional	mm

annotation

documentation

WATER EQUIVALENT OF NEW SNOW

element SnowHeight/DENSITY

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeInt

properties

isRef	0
content	complex
nillable	true

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsDensity	optional	kg/m3

annotation

documentation

DENSITY OF NEW SNOW

complexType SnowHeightIrregular

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of SnowHeight

properties

base	SnowHeight

children

SNOW_HEIGHT WEIGHT W DENSITY

used by

elements

ObsParametersField/FIELD_HST ObsParametersWx/HIN ObsParametersWx/HIT ObsParametersWx/HSB ObsParametersWx/HST

SPECIFIES DATE WHEN SNOWBOARD WAS CLEARED LAST TIME

SPECIFIES TIME WHEN SNOWBOARD WAS CLEARED LAST TIME

Snow height measurement type for irregular intervals

complexType SnowTemp

diagram

namespace

http://www.avalanche.ca/caaml

minInclusive	-90
maxInclusive	60
fractionDigits	1

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsTemperature	optional	C
DEPTH	NonNegativeInt	required

annotation

documentation

Snow temperature measurment type

complexType Temp

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TempValue

minInclusive	-90
maxInclusive	60
fractionDigits	1

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsTemperature	optional	C

annotation

documentation

Temperature measurement type

complexType Wind

diagram

namespace

http://www.avalanche.ca/caaml

ObsParametersWx/WIND ObsParametersField/WIND/WIND1 ObsParametersField/WIND/WIND2

annotation

documentation

Wind observation type

element Wind/SPEED

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

WIND SPEED

element Wind/SPEED/CAT

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	C
enumeration	V
enumeration	L
enumeration	M
enumeration	S
enumeration	X

annotation

documentation

CATEGORICAL WIND SPEED

element Wind/SPEED/NUM

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of NonNegativeInt

properties

isRef	0
content	complex
nillable	true

facets

minInclusive

attributes

Name	Type	Use	Default	Fixed	Annotation
UNITS	UnitsWindSpeed	optional	km/h

annotation

documentation

NUMERICAL WIND SPEED

element Wind/DIRECTION

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

WIND DIRECTION

element Wind/DIRECTION/CARDINAL

diagram

namespace

http://www.avalanche.ca/caaml

type

DirectionCardinal

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	N
enumeration	NNE
enumeration	NE
enumeration	ENE
enumeration	E
enumeration	ESE
enumeration	SE
enumeration	SSE
enumeration	S
enumeration	SSW
enumeration	SW
enumeration	WSW
enumeration	W
enumeration	WNW
enumeration	NW
enumeration	NNW
enumeration	VAR
enumeration	ALL

annotation

documentation

CARDINAL WIND DIRECTION

element Wind/DIRECTION/NUM

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:int

properties

isRef	0
content	simple
nillable	true

facets

minInclusive	0
maxInclusive	360

annotation

documentation

NUMERICAL WIND DIRECTION

complexType Xport

diagram

namespace

http://www.avalanche.ca/caaml

ObsParametersWx/XPORT ObsParametersField/XPORT/XPORT1 ObsParametersField/XPORT/XPORT2

annotation

documentation

Snow drift observation type

element Xport/XPEXTENT

diagram

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	Nil
enumeration	Prev
enumeration	M
enumeration	I
enumeration	U

annotation

documentation

EXTENT OF SNOW TRANSPORT

element Xport/XPDIR

diagram

namespace

http://www.avalanche.ca/caaml

type

DirectionCardinal

properties

isRef	0
content	simple
nillable	true

facets

enumeration	~
enumeration	N
enumeration	NNE
enumeration	NE
enumeration	ENE
enumeration	E
enumeration	ESE
enumeration	SE
enumeration	SSE
enumeration	S
enumeration	SSW
enumeration	SW
enumeration	WSW
enumeration	W
enumeration	WNW
enumeration	NW
enumeration	NNW
enumeration	VAR
enumeration	ALL

annotation

documentation

INDICATED CARDINAL WIND DIRECTION

simpleType AvMoisture

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements

ObsParametersAv/LWC/DEPOSIT ObsParametersAv/LWC/STARTZONE

facets

enumeration	~
enumeration	D
enumeration	M
enumeration	W
enumeration	U

annotation

documentation

Avalanche liquide water content enumerations

simpleType AvNum

namespace

http://www.avalanche.ca/caaml

type

union of (NonNegativeInt, restriction of xs:string)

used by

element

ObsParametersAv/NUM_OCCUR

annotation

documentation

Avalanche number data type

simpleType AvSize

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements

ObsParametersAv/AV_SIZE/MAX ObsParametersAv/AV_SIZE/MIN

facets

enumeration	0
enumeration	0.5
enumeration	1
enumeration	1.5
enumeration	2
enumeration	2.5
enumeration	3
enumeration	3.5
enumeration	4
enumeration	4.5
enumeration	5

annotation

documentation

Avalanche size enumerations

simpleType PrecipTypeIntensity

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements

ObsParametersWx/PRECIP_TI ObsParametersField/PRECIP_TI/PRECIP_TI1 ObsParametersField/PRECIP_TI/PRECIP_TI2

facets

pattern	~
pattern	S\-1
pattern	S\d{1,2}
pattern	R?S?
pattern	R[VLMH]
pattern	G
pattern	ZR
pattern	NIL

annotation

documentation

Precipitation type and intensity enumerations

simpleType RatingHazard

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements

ObsParametersBulletin/DNGR_ALP ObsParametersDngr/DNGR_ALP ObsParametersBulletin/DNGR_BTL ObsParametersDngr/DNGR_BTL ObsParametersBulletin/DNGR_TL ObsParametersDngr/DNGR_TL

facets

enumeration	~
enumeration	LOW
enumeration	MODERATE
enumeration	CONSIDERABLE
enumeration	HIGH
enumeration	EXTREME

annotation

documentation

Hazard rating enumerations

simpleType RatingStability

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements

ObsParametersStb/STB_ALP ObsParametersStb/STB_BTL ObsParametersStb/STB_TL

facets

enumeration	~
enumeration	VP
enumeration	VP-P
enumeration	P-VP
enumeration	P
enumeration	P-F
enumeration	F-P
enumeration	F
enumeration	F-G
enumeration	G-F
enumeration	G
enumeration	G-VG
enumeration	VG-G
enumeration	VG

annotation

documentation

Stability rating enumerations

simpleType SnowHeightValue

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:float

used by

element

SnowHeight/SNOW_HEIGHT

facets

minInclusive	0
pattern	(.1)
pattern	(0.1)
pattern	(\d{1,4}.0)
pattern	\d{1,4}

annotation

documentation

Snow height measurement patterns

simpleType TempValue

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:decimal

used by

elements	ObsParametersWx/AIR_TEMP_MAX ObsParametersWx/AIR_TEMP_MIN ObsParametersWx/AIR_TEMP_PRES ObsParametersField/AIR_TEMP/HI_TEMP ObsParametersField/AIR_TEMP/LO_TEMP ObsParametersWx/SNOW_TEMP_10
complexType	Temp

facets

minInclusive	-90
maxInclusive	60
fractionDigits	1

annotation

documentation

Temperature measurement facets

simpleType Trend

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements

ObsParametersWx/AIR_TEMP_TREND ObsParametersWx/BARO_TREND

facets

enumeration	RR
enumeration	R
enumeration	S
enumeration	F
enumeration	FR
enumeration	~

annotation

documentation

Trend (air temp and atmos pressure) enumarations

group ContactInfo

diagram

namespace

http://www.avalanche.ca/caaml

children

PO_BOX STREET_ADDRESS CITY PROVINCE COUNTRY POSTAL_CODE PHONE FAX EMAIL

used by

complexType	Person
group	OperationInfo

annotation

documentation

Group of contact information elements

element ContactInfo/PO_BOX

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of xs:string

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element ContactInfo/STREET_ADDRESS

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of xs:string

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element ContactInfo/CITY

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of xs:string

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element ContactInfo/PROVINCE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of ProvinceStateEnum

properties

isRef	0
content	complex

facets

enumeration	AB
enumeration	BC
enumeration	MB
enumeration	NB
enumeration	NF
enumeration	NT
enumeration	NS
enumeration	ON
enumeration	PE
enumeration	QC
enumeration	SK
enumeration	YT
enumeration	AK
enumeration	ID
enumeration	MT
enumeration	WA
enumeration	WY
enumeration	UT
enumeration	CO
enumeration	CA
enumeration	NM
enumeration	NV
enumeration	OR

attributes

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element ContactInfo/COUNTRY

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of CountryEnum

properties

isRef	0
content	complex

facets

enumeration	Canada
enumeration	USA

attributes

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element ContactInfo/POSTAL_CODE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of PostalCode

properties

isRef	0
content	complex

facets

pattern	\d{5}
pattern	\w\d\w \d\w\d

attributes

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element ContactInfo/PHONE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TelephoneFaxNumber

properties

isRef	0
content	complex

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element ContactInfo/FAX

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TelephoneFaxNumber

properties

isRef	0
content	complex

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element ContactInfo/EMAIL

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of Email

properties

isRef	0
content	complex

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

group OperationInfo

diagram

namespace

http://www.avalanche.ca/caaml

children

LOCATION_REFERENCE TYPE TIME_ZONE PO_BOX STREET_ADDRESS CITY PROVINCE COUNTRY POSTAL_CODE PHONE FAX EMAIL WEBSITE SPONSOR CONTACT GROUPING

Group of operation information elements

element OperationInfo/TYPE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of OperationType

properties

isRef	0
content	complex

facets

minLength	1
enumeration	Heli-Ski
enumeration	Cat-Ski
enumeration	Backcountry Lodge
enumeration	Ski Area
enumeration	Highway
enumeration	Park
enumeration	Mine
enumeration	Forestry
enumeration	Railroad
enumeration	Research/Academic
enumeration	Public
enumeration	Avalanche Centre
enumeration	Independent Guide

attributes

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element OperationInfo/TIME_ZONE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of TimeZoneEnum

properties

isRef	0
content	complex

facets

enumeration	PST
enumeration	PDT
enumeration	MST
enumeration	MDT
enumeration	CST
enumeration	CDT
enumeration	EST
enumeration	EDT
enumeration	AST
enumeration	ADT
enumeration	NST
enumeration	NDT
enumeration	YST
enumeration	YDT
enumeration	AKST
enumeration	AKDT

attributes

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element OperationInfo/WEBSITE

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of xs:anyURI

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
PRIVACY	PrivacyLevel	optional

element OperationInfo/SPONSOR

diagram

namespace

http://www.avalanche.ca/caaml

type

OperationReference

properties

isRef	0
content	complex

children

NAME ABBREV LOGO

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

element OperationInfo/CONTACT

diagram

namespace

http://www.avalanche.ca/caaml

type

PersonReferenceBusiness

properties

isRef	0
content	complex

children

FIRST_NAME LAST_NAME INITIALS FUNCTION PHONE FAX EMAIL

attributes

Name	Type	Use	Default	Fixed	Annotation
PERS_ID	IDType	optional
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

element OperationInfo/GROUPING

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef	0
content	complex

children

OP_PARENT OP_CHILD

element OperationInfo/GROUPING/OP_PARENT

diagram

namespace

http://www.avalanche.ca/caaml

type

OperationReference

properties

isRef	0
content	complex

children

NAME ABBREV LOGO

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

element OperationInfo/GROUPING/OP_CHILD

diagram

namespace

http://www.avalanche.ca/caaml

type

OperationReference

properties

isRef	0
content	complex

children

NAME ABBREV LOGO

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

complexType Operation

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of OperationBase

properties

base	OperationBase

children

NAME ABBREV LOGO LOCATION_REFERENCE TYPE TIME_ZONE PO_BOX STREET_ADDRESS CITY PROVINCE COUNTRY POSTAL_CODE PHONE FAX EMAIL WEBSITE SPONSOR CONTACT GROUPING

used by

element

CAAMLRootElementType/OPERATION/OPERATION_INFO

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

Type definition for operation element

complexType OperationBase

diagram

namespace

http://www.avalanche.ca/caaml

Operation OperationReference

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

Abstract base definition for operation element

element OperationBase/NAME

diagram

namespace

http://www.avalanche.ca/caaml

type

NoEmptyString

properties

isRef	0
content	simple

facets

minLength

element OperationBase/ABBREV

diagram

namespace

http://www.avalanche.ca/caaml

type

NoEmptyString

properties

isRef	0
content	simple

facets

minLength

element OperationBase/LOGO

diagram

namespace

http://www.avalanche.ca/caaml

properties

isRef

complexType OperationReference

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of OperationBase

properties

base	OperationBase

OperationInfo/GROUPING/OP_CHILD OperationInfo/GROUPING/OP_PARENT BulletinType/SPONSOR OperationInfo/SPONSOR

attributes

Name	Type	Use	Default	Fixed	Annotation
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

Type definition for operation reference

complexType Person

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of PersonBase

properties

base	PersonBase

children

FIRST_NAME LAST_NAME INITIALS PO_BOX STREET_ADDRESS CITY PROVINCE COUNTRY POSTAL_CODE PHONE FAX EMAIL

used by

element

CAAMLRootElementType/OPERATION/PEOPLE_INFO/PEOPLE_PRIVATE

attributes

Name	Type	Use	Default	Fixed	Annotation
PERS_ID	IDType	optional
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

Type definition for person element

complexType PersonBase

diagram

namespace

http://www.avalanche.ca/caaml

children

FIRST_NAME LAST_NAME INITIALS

used by

element	BulletinType/FORECASTER
complexTypes	Person PersonReferencePrivate

attributes

Name	Type	Use	Default	Fixed	Annotation
PERS_ID	IDType	optional
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

Abstract base definition for person element

element PersonBase/FIRST_NAME

diagram

namespace

http://www.avalanche.ca/caaml

type

NoEmptyString

properties

isRef	0
content	simple

First name

element PersonBase/LAST_NAME

diagram

namespace

http://www.avalanche.ca/caaml

type

NoEmptyString

properties

isRef	0
content	simple

Last name

element PersonBase/INITIALS

diagram

namespace

http://www.avalanche.ca/caaml

type

NoEmptyString

properties

isRef	0
content	simple

Initials

complexType PersonReferenceBusiness

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of PersonReferencePrivate

properties

base	PersonReferencePrivate

children

FIRST_NAME LAST_NAME INITIALS FUNCTION PHONE FAX EMAIL

used by

element

OperationInfo/CONTACT

attributes

Name	Type	Use	Default	Fixed	Annotation
PERS_ID	IDType	optional
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

Type definition for business person reference

element PersonReferenceBusiness/FUNCTION

diagram

namespace

http://www.avalanche.ca/caaml

type

xs:string

properties

isRef	0
content	simple

element PersonReferenceBusiness/PHONE

diagram

namespace

http://www.avalanche.ca/caaml

type

TelephoneFaxNumber

properties

isRef	0
content	simple

facets

pattern

\d{3}-\d{3}-\d{4}

element PersonReferenceBusiness/FAX

diagram

namespace

http://www.avalanche.ca/caaml

type

TelephoneFaxNumber

properties

isRef	0
content	simple

facets

pattern

\d{3}-\d{3}-\d{4}

element PersonReferenceBusiness/EMAIL

diagram

namespace

http://www.avalanche.ca/caaml

type

TelephoneFaxNumber

properties

isRef	0
content	simple

facets

pattern

\d{3}-\d{3}-\d{4}

complexType PersonReferencePrivate

diagram

namespace

http://www.avalanche.ca/caaml

type

extension of PersonBase

properties

base	PersonBase

children

FIRST_NAME LAST_NAME INITIALS

used by

complexType

PersonReferenceBusiness

attributes

Name	Type	Use	Default	Fixed	Annotation
PERS_ID	IDType	optional
OP_ID	IDType	optional
PRIVACY	PrivacyLevel	optional

annotation

documentation

Type definition for private person reference

simpleType CountryEnum

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

enumeration	Canada
enumeration	USA

annotation

documentation

Definition of enumeration of countries

simpleType Email

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

Definition of email pattern

simpleType OperationType

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

minLength	1
enumeration	Heli-Ski
enumeration	Cat-Ski
enumeration	Backcountry Lodge
enumeration	Ski Area
enumeration	Highway
enumeration	Park
enumeration	Mine
enumeration	Forestry
enumeration	Railroad
enumeration	Research/Academic
enumeration	Public
enumeration	Avalanche Centre
enumeration	Independent Guide

annotation

documentation

Enumeration of operation types

simpleType PostalCode

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

element

ContactInfo/POSTAL_CODE

facets

pattern	\d{5}
pattern	\w\d\w \d\w\d

annotation

documentation

Definition of postal/zip code pattern

simpleType ProvinceStateEnum

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

enumeration	AB
enumeration	BC
enumeration	MB
enumeration	NB
enumeration	NF
enumeration	NT
enumeration	NS
enumeration	ON
enumeration	PE
enumeration	QC
enumeration	SK
enumeration	YT
enumeration	AK
enumeration	ID
enumeration	MT
enumeration	WA
enumeration	WY
enumeration	UT
enumeration	CO
enumeration	CA
enumeration	NM
enumeration	NV
enumeration	OR

annotation

documentation

Enumeration of Canadian provinces and US states

simpleType TelephoneFaxNumber

namespace

http://www.avalanche.ca/caaml

type

restriction of xs:string

used by

elements

PersonReferenceBusiness/EMAIL PersonReferenceBusiness/FAX ContactInfo/FAX PersonReferenceBusiness/PHONE ContactInfo/PHONE

Definition of phone number pattern

element gml:_Feature

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractFeatureType

properties

content	complex
substGrp	gml:_GML
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location

used by

complexTypes

gml:FeatureArrayPropertyType gml:FeaturePropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:_FeatureCollection

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractFeatureCollectionType

properties

content	complex
substGrp	gml:_Feature
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location gml:featureMember gml:featureMembers

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:boundedBy

diagram

namespace

http://www.opengis.net/gml

type

gml:BoundingShapeType

gml:Envelope gml:Null

used by

complexTypes

gml:AbstractFeatureType gml:BoundedFeatureType

element gml:centerLineOf

diagram

namespace

http://www.opengis.net/gml

type

gml:CurvePropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:centerOf

diagram

namespace

http://www.opengis.net/gml

type

gml:PointPropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:edgeOf

diagram

namespace

http://www.opengis.net/gml

type

gml:CurvePropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:EnvelopeWithTimePeriod

diagram

namespace

http://www.opengis.net/gml

type

gml:EnvelopeWithTimePeriodType

properties

content	complex
substGrp	gml:Envelope

children

lowerCorner upperCorner gml:coord gml:pos gml:coordinates gml:timePosition

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

http://www.opengis.net/gml

type

gml:SurfacePropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:FeatureCollection

diagram

namespace

http://www.opengis.net/gml

type

gml:FeatureCollectionType

properties

content	complex
substGrp	gml:_Feature

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location gml:featureMember gml:featureMembers

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:featureMember

diagram

namespace

http://www.opengis.net/gml

type

gml:FeaturePropertyType

gml:AbstractFeatureCollectionType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:featureMembers

diagram

namespace

http://www.opengis.net/gml

type

gml:FeatureArrayPropertyType

gml:AbstractFeatureCollectionType

element gml:featureProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:FeaturePropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:location

diagram

namespace

http://www.opengis.net/gml

type

gml:LocationPropertyType

gml:_Geometry gml:LocationKeyWord gml:LocationString gml:Null

used by

complexTypes

gml:AbstractFeatureType gml:BoundedFeatureType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Deprecated in GML 3.1.0

element gml:LocationKeyWord

diagram

namespace

http://www.opengis.net/gml

gml:LocationPropertyType

attributes

Name	Type	Use	Default	Fixed	Annotation
codeSpace	xs:anyURI	optional

element gml:LocationString

diagram

namespace

http://www.opengis.net/gml

gml:LocationPropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:position

diagram

namespace

http://www.opengis.net/gml

type

gml:PointPropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:priorityLocation

diagram

namespace

http://www.opengis.net/gml

type

gml:PriorityLocationPropertyType

properties

content	complex
substGrp	gml:location

children

gml:_Geometry gml:LocationKeyWord gml:LocationString gml:Null


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Deprecated in GML 3.1.0

complexType gml:AbstractFeatureCollectionType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractFeatureType

properties

base	gml:AbstractFeatureType
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location gml:featureMember gml:featureMembers

used by

element	gml:_FeatureCollection
complexTypes	AbstractLocationCollectionType gml:FeatureCollectionType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

 A feature collection contains zero or more features.

complexType gml:AbstractFeatureType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGMLType

properties

base	gml:AbstractGMLType
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location

used by

element	gml:_Feature
complexTypes	AbstractLocationType AbstractObservationType gml:AbstractFeatureCollectionType gml:BoundedFeatureType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

 An abstract feature provides a set of common properties, including id, metaDataProperty, name and description inherited from AbstractGMLType, plus boundedBy.    A concrete feature type must derive from this type and specify additional  properties in an application schema. A feature must possess an identifying attribute ('id' - 'fid' has been deprecated).

complexType gml:BoundedFeatureType

diagram

namespace

http://www.opengis.net/gml

type

restriction of gml:AbstractFeatureType

properties

base	gml:AbstractFeatureType
abstract	true

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

 Makes boundedBy mandatory

complexType gml:BoundingShapeType

diagram

namespace

http://www.opengis.net/gml

children

gml:Envelope gml:Null

Bounding shape.

complexType gml:EnvelopeWithTimePeriodType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:EnvelopeType

properties

base	gml:EnvelopeType

children

lowerCorner upperCorner gml:coord gml:pos gml:coordinates gml:timePosition

used by

element

gml:EnvelopeWithTimePeriod

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

Envelope that includes also a temporal extent.

complexType gml:FeatureArrayPropertyType

diagram

namespace

http://www.opengis.net/gml

Container for features - follow gml:ArrayAssociationType pattern.

complexType gml:FeatureCollectionType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractFeatureCollectionType

properties

base	gml:AbstractFeatureCollectionType

children

gml:metaDataProperty gml:description gml:name gml:boundedBy gml:location gml:featureMember gml:featureMembers

used by

element

gml:FeatureCollection

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

 Concrete generic feature collection.

complexType gml:FeaturePropertyType

diagram

namespace

http://www.opengis.net/gml

gml:featureMember gml:featureProperty


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Container for a feature - follow gml:AssociationType pattern.

complexType gml:LocationPropertyType

diagram

namespace

http://www.opengis.net/gml

children

gml:_Geometry gml:LocationKeyWord gml:LocationString gml:Null

used by

element	gml:location
complexType	gml:PriorityLocationPropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Convenience property for generalised location.  
      A representative location for plotting or analysis.  
      Often augmented by one or more additional geometry properties with more specific semantics.

documentation

Deprecated in GML 3.1.0

complexType gml:PriorityLocationPropertyType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:LocationPropertyType

properties

base	gml:LocationPropertyType

children

gml:_Geometry gml:LocationKeyWord gml:LocationString gml:Null


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

documentation	G-XML component
documentation	Deprecated in GML 3.1.0

element gml:_Ring

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractRingType

properties

content	complex
substGrp	gml:_Geometry
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

complexType

gml:AbstractRingPropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

The "_Ring" element is the abstract head of the substituition group for all closed boundaries of a surface patch.

element gml:_Surface

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractSurfaceType

properties

content	complex
substGrp	gml:_GeometricPrimitive
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

complexTypes

gml:SurfaceArrayPropertyType gml:SurfacePropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

The "_Surface" element is the abstract head of the substituition group for all (continuous) surface elements.

element gml:exterior

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractRingPropertyType

A boundary of a surface consists of a number of rings. In the normal 2D case, one of these rings is distinguished as being the exterior boundary. In a general manifold this is not always possible, in which case all boundaries shall be listed as interior boundaries, and the exterior will be empty.

element gml:innerBoundaryIs

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractRingPropertyType

properties

content	complex
substGrp	gml:interior


				Deprecated with GML 3.0, included only for backwards compatibility with GML 2. Use "interior" instead.

element gml:interior

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractRingPropertyType

A boundary of a surface consists of a number of rings. The "interior" rings seperate the surface / surface patch from the area enclosed by the rings.

element gml:LinearRing

diagram

namespace

http://www.opengis.net/gml

type

gml:LinearRingType

properties

content	complex
substGrp	gml:_Ring

children

gml:metaDataProperty gml:description gml:name gml:pos gml:pointProperty gml:pointRep gml:posList gml:coordinates gml:coord

used by

complexType

gml:LinearRingPropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

element gml:outerBoundaryIs

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractRingPropertyType

properties

content	complex
substGrp	gml:exterior


				Deprecated with GML 3.0, included only for backwards compatibility with GML 2. Use "exterior" instead.

element gml:Polygon

diagram

namespace

http://www.opengis.net/gml

type

gml:PolygonType

properties

content	complex
substGrp	gml:_Surface

children

gml:metaDataProperty gml:description gml:name gml:exterior gml:interior

used by

complexType

gml:PolygonPropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

element gml:polygonProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:PolygonPropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Deprecated with GML 3.0 and included only for backwards compatibility with GML 2.0. Use "surfaceProperty" instead.
This property element either references a polygon via the XLink-attributes or contains the polygon element.

element gml:surfaceArrayProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:SurfaceArrayPropertyType

element gml:surfaceProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:SurfacePropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

appInfo

<sch:pattern>
	<sch:rule context="gml:surfaceProperty">
		<sch:extends rule="hrefOrContent"/>
	</sch:rule>
</sch:pattern>

documentation

This property element either references a surface via the XLink-attributes or contains the surface element. surfaceProperty is the predefined property which can be used by GML Application Schemas whenever a GML Feature has a property with a value that is substitutable for _Surface.

complexType gml:AbstractRingPropertyType

diagram

namespace

http://www.opengis.net/gml

gml:exterior gml:innerBoundaryIs gml:interior gml:outerBoundaryIs

annotation

documentation


			        Encapsulates a ring to represent the surface boundary property of a surface.

complexType gml:AbstractRingType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGeometryType

properties

base	gml:AbstractGeometryType
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

element	gml:_Ring
complexType	gml:LinearRingType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation


				An abstraction of a ring to support surface boundaries of different complexity.

complexType gml:AbstractSurfaceType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGeometricPrimitiveType

properties

base	gml:AbstractGeometricPrimitiveType

children

gml:metaDataProperty gml:description gml:name

used by

element	gml:_Surface
complexType	gml:PolygonType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation


				An abstraction of a surface to support the different levels of complexity. A surface is always a continuous region of a plane.

complexType gml:LinearRingPropertyType

diagram

namespace

http://www.opengis.net/gml


			        Encapsulates a ring to represent properties in features or geometry collections.

complexType gml:LinearRingType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractRingType

properties

base	gml:AbstractRingType

children

gml:metaDataProperty gml:description gml:name gml:pos gml:pointProperty gml:pointRep gml:posList gml:coordinates gml:coord

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

A LinearRing is defined by four or more coordinate tuples, with linear interpolation between them; the first and last coordinates must be coincident.

complexType gml:PolygonPropertyType

diagram

namespace

http://www.opengis.net/gml


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

This type is deprecated with GML 3 and shall not be used. It is included for backwards compatibility with GML 2. Use SurfacePropertyType instead.
A property that has a polygon as its value domain can either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Either the reference or the contained element must be given, but neither both nor none.

complexType gml:PolygonType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractSurfaceType

properties

base	gml:AbstractSurfaceType

children

gml:metaDataProperty gml:description gml:name gml:exterior gml:interior

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

A Polygon is a special surface that is defined by a single surface patch. The boundary of this patch is coplanar and the polygon uses planar interpolation in its interior. It is backwards compatible with the Polygon of GML 2, GM_Polygon of ISO 19107 is implemented by PolygonPatch.

complexType gml:SurfaceArrayPropertyType

diagram

namespace

http://www.opengis.net/gml

gml:surfaceArrayProperty

annotation

documentation

A container for an array of surfaces. The elements are always contained in the array property, referencing geometry elements or arrays of geometry elements is not supported.

complexType gml:SurfacePropertyType

diagram

namespace

http://www.opengis.net/gml

gml:extentOf gml:surfaceProperty


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

A property that has a surface as its value domain can either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Either the reference or the contained element must be given, but neither both nor none.

element gml:_TimeComplex

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractTimeComplexType

properties

content	complex
substGrp	gml:_TimeObject
abstract	true

children

gml:metaDataProperty gml:description gml:name

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation


			This abstract element acts as the head of the substitution group for temporal complexes. 
			Temporal complex is an aggregation of temporal primitives as its components, 
			represents a temporal geometric complex and a temporal topology complex. 
			N.B. Temporal geometric complex is not defined in this schema.

element gml:_TimeGeometricPrimitive

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractTimeGeometricPrimitiveType

properties

content	complex
substGrp	gml:_TimePrimitive
abstract	true

children

gml:metaDataProperty gml:description gml:name relatedTime

used by

complexType

gml:TimeGeometricPrimitivePropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


      This abstract element acts as the head of the substitution group for temporal geometric primitives.

element gml:_timeLength

diagram

namespace

http://www.opengis.net/gml

type

gml:TimeLengthType

properties

content	simple
abstract	true


      This abstract element serves as the head of the substitution group for elements used 
      to indicate temporal length or distance (duration, interval).

element gml:_TimeObject

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractTimeObjectType

properties

content	complex
substGrp	gml:_GML
abstract	true

children

gml:metaDataProperty gml:description gml:name

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation


      This abstract element acts as the head of the substitution group for temporal primitives and complexes.

element gml:_TimePrimitive

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractTimePrimitiveType

properties

content	complex
substGrp	gml:_TimeObject
abstract	true

children

gml:metaDataProperty gml:description gml:name relatedTime

used by

complexType

gml:TimePrimitivePropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation


      This abstract element acts as the head of the substitution group for temporal primitives.

element gml:duration

diagram

namespace

http://www.opengis.net/gml

type

xs:duration

properties

content	simple
substGrp	gml:_timeLength

annotation

documentation


      This element is an instance of the primitive xsd:duration simple type to 
      enable use of the ISO 8601 syntax for temporal length (e.g. P5DT4H30M). 
      It is a valid subtype of TimeDurationType according to section 3.14.6, 
      rule 2.2.4 in XML Schema, Part 1.

element gml:TimeInstant

diagram

namespace

http://www.opengis.net/gml

type

gml:TimeInstantType

properties

content	complex
substGrp	gml:_TimeGeometricPrimitive

children

gml:metaDataProperty gml:description gml:name relatedTime gml:timePosition

used by

complexType

gml:TimeInstantPropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:timeInterval

diagram

namespace

http://www.opengis.net/gml

type

gml:TimeIntervalLengthType

properties

content	complex
substGrp	gml:_timeLength

attributes

Name	Type	Use	Default	Fixed	Annotation
unit	gml:TimeUnitType	required
radix	xs:positiveInteger	optional
factor	xs:integer	optional

annotation

documentation


			This element is a valid subtype of TimeDurationType 
			according to section 3.14.6, rule 2.2.4 in XML Schema, Part 1.

element gml:TimePeriod

diagram

namespace

http://www.opengis.net/gml

type

gml:TimePeriodType

properties

content	complex
substGrp	gml:_TimeGeometricPrimitive

children

gml:metaDataProperty gml:description gml:name relatedTime beginPosition begin endPosition end gml:_timeLength

used by

complexType

gml:TimePeriodPropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:timePosition

diagram

namespace

http://www.opengis.net/gml

gml:EnvelopeWithTimePeriodType gml:TimeInstantType

attributes

Name	Type	Use	Default	Fixed	Annotation
frame	xs:anyURI	optional	#ISO-8601
calendarEraName	xs:string	optional
indeterminatePosition	gml:TimeIndeterminateValueType	optional

annotation

documentation

Direct representation of a temporal position

element gml:validTime

diagram

namespace

http://www.opengis.net/gml

type

gml:TimePrimitivePropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType gml:AbstractTimeComplexType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractTimeObjectType

properties

base	gml:AbstractTimeObjectType
abstract	true

children

gml:metaDataProperty gml:description gml:name

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation


	The abstract supertype for temporal complexes.

complexType gml:AbstractTimeGeometricPrimitiveType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractTimePrimitiveType

properties

base	gml:AbstractTimePrimitiveType
abstract	true

children

gml:metaDataProperty gml:description gml:name relatedTime

used by

element	gml:_TimeGeometricPrimitive
complexTypes	gml:TimeInstantType gml:TimePeriodType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.


      The abstract supertype for temporal geometric primitives.
       A temporal geometry must be associated with a temporal reference system via URI. 
       The Gregorian calendar with UTC is the default reference system, following ISO 
       8601. Other reference systems in common use include the GPS calendar and the 
       Julian calendar.

complexType gml:AbstractTimeObjectType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGMLType

properties

base	gml:AbstractGMLType
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

element	gml:_TimeObject
complexTypes	gml:AbstractTimeComplexType gml:AbstractTimePrimitiveType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation


      The abstract supertype for temporal objects.

complexType gml:AbstractTimePrimitiveType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractTimeObjectType

properties

base	gml:AbstractTimeObjectType
abstract	true

children

gml:metaDataProperty gml:description gml:name relatedTime

used by

element	gml:_TimePrimitive
complexType	gml:AbstractTimeGeometricPrimitiveType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation


      The abstract supertype for temporal primitives.

element gml:AbstractTimePrimitiveType/relatedTime

diagram

namespace

http://www.opengis.net/gml

type

gml:RelatedTimeType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

relativePosition

complexType gml:RelatedTimeType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:TimePrimitivePropertyType

properties

base	gml:TimePrimitivePropertyType

gml:AbstractTimePrimitiveType/relatedTime


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

relativePosition

complexType gml:TimeGeometricPrimitivePropertyType

diagram

namespace

http://www.opengis.net/gml

children

gml:_TimeGeometricPrimitive


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType gml:TimeInstantPropertyType

diagram

namespace

http://www.opengis.net/gml

gml:TimePeriodType/begin gml:TimePeriodType/end


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType gml:TimeInstantType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractTimeGeometricPrimitiveType

properties

base	gml:AbstractTimeGeometricPrimitiveType

children

gml:metaDataProperty gml:description gml:name relatedTime gml:timePosition

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

Omit back-pointers begunBy, endedBy.

complexType gml:TimeIntervalLengthType

diagram

namespace

http://www.opengis.net/gml

type

extension of xs:decimal

properties

base	decimal
final	#all

Name	Type	Use	Default	Fixed	Annotation
unit	gml:TimeUnitType	required
radix	xs:positiveInteger	optional
factor	xs:integer	optional

annotation

documentation


      This type extends the built-in xsd:decimal simple type to allow floating-point 
      values for temporal length. According to  the ISO 11404 model you have to use 
      positiveInteger together with appropriate values for radix and factor. The 
      resolution of the time interval is to one radix ^(-factor) of the specified 
      time unit (e.g. unit="second", radix="10", factor="3" specifies a resolution 
      of milliseconds). It is a subtype of TimeDurationType.

complexType gml:TimePeriodPropertyType

diagram

namespace

http://www.opengis.net/gml


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType gml:TimePeriodType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractTimeGeometricPrimitiveType

properties

base	gml:AbstractTimeGeometricPrimitiveType

children

gml:metaDataProperty gml:description gml:name relatedTime beginPosition begin endPosition end gml:_timeLength

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:TimePeriodType/beginPosition

diagram

namespace

http://www.opengis.net/gml

type

gml:TimePositionType

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
frame	xs:anyURI	optional	#ISO-8601
calendarEraName	xs:string	optional
indeterminatePosition	gml:TimeIndeterminateValueType	optional

element gml:TimePeriodType/begin

diagram

namespace

http://www.opengis.net/gml

type

gml:TimeInstantPropertyType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:TimePeriodType/endPosition

diagram

namespace

http://www.opengis.net/gml

type

gml:TimePositionType

properties

isRef	0
content	complex

attributes

Name	Type	Use	Default	Fixed	Annotation
frame	xs:anyURI	optional	#ISO-8601
calendarEraName	xs:string	optional
indeterminatePosition	gml:TimeIndeterminateValueType	optional

element gml:TimePeriodType/end

diagram

namespace

http://www.opengis.net/gml

type

gml:TimeInstantPropertyType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType gml:TimePositionType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:TimePositionUnion

properties

base	gml:TimePositionUnion
final	#all

used by

elements

gml:TimePeriodType/beginPosition gml:TimePeriodType/endPosition gml:timePosition

attributes

Name	Type	Use	Default	Fixed	Annotation
frame	xs:anyURI	optional	#ISO-8601
calendarEraName	xs:string	optional
indeterminatePosition	gml:TimeIndeterminateValueType	optional

annotation

documentation

Direct representation of a temporal position. 
      Indeterminate time values are also allowed, as described in ISO 19108. The indeterminatePosition 
      attribute can be used alone or it can qualify a specific value for temporal position (e.g. before 
      2002-12, after 1019624400). 
      For time values that identify position within a calendar, the calendarEraName attribute provides 
      the name of the calendar era to which the date is referenced (e.g. the Meiji era of the Japanese calendar).

complexType gml:TimePrimitivePropertyType

diagram

namespace

http://www.opengis.net/gml

children

gml:_TimePrimitive

used by

element	gml:validTime
complexType	gml:RelatedTimeType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

simpleType gml:CalDate

namespace

http://www.opengis.net/gml

type

union of (xs:date, xs:gYearMonth, xs:gYear)

used by

simpleType

gml:TimePositionUnion

annotation

documentation


      Calendar dates may be indicated with varying degrees of precision, 
      using year, year-month, date. 
      When used with non-Gregorian calendars based on years, months, days, 
      the same lexical representation should still be used, with leading zeros added if the 
      year value would otherwise have fewer than four digits.  
      time is used for a position that recurs daily (see clause 5.4.4.2 of ISO 19108:2002).

simpleType gml:TimeIndeterminateValueType

namespace

http://www.opengis.net/gml

type

restriction of xs:string

used by

attribute

gml:TimePositionType/@indeterminatePosition

facets

enumeration	after
enumeration	before
enumeration	now
enumeration	unknown

annotation

documentation


        This enumerated data type specifies values for indeterminate positions.

simpleType gml:TimeLengthType

namespace

http://www.opengis.net/gml

type

union of (xs:duration, xs:decimal)


      Base type for describing temporal length or distance. The value space is further 
      constrained by subtypes that conform to the ISO 8601 or ISO 11404 standards.

simpleType gml:TimePositionUnion

namespace

http://www.opengis.net/gml

type

union of (gml:CalDate, xs:time, xs:dateTime, xs:anyURI, xs:decimal)


      The ISO 19108:2002 hierarchy of subtypes for temporal position are collapsed 
      by defining a union of XML Schema simple types for indicating temporal position relative 
      to a specific reference system. 
      
      Dates and dateTime may be indicated with varying degrees of precision.  
      dateTime by itself does not allow right-truncation, except for fractions of seconds. 
      When used with non-Gregorian calendars based on years, months, days, 
      the same lexical representation should still be used, with leading zeros added if the 
      year value would otherwise have fewer than four digits.  
      
      An ordinal position may be referenced via URI identifying the definition of an ordinal era.  
      
      A time coordinate value is indicated as a decimal (e.g. UNIX time, GPS calendar).

simpleType gml:TimeUnitType

namespace

http://www.opengis.net/gml

type

union of (restriction of xs:string, restriction of xs:string)

used by

attribute

gml:TimeIntervalLengthType/@unit

annotation

documentation


        Standard units for measuring time intervals (see ISO 31-1).

element gml:_Curve

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractCurveType

properties

content	complex
substGrp	gml:_GeometricPrimitive
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

complexTypes

gml:CurveArrayPropertyType gml:CurvePropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

The "_Curve" element is the abstract head of the substituition group for all (continuous) curve elements.

element gml:_GeometricPrimitive

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractGeometricPrimitiveType

properties

content	complex
substGrp	gml:_Geometry
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

complexType

gml:GeometricPrimitivePropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

The "_GeometricPrimitive" element is the abstract head of the substituition group for all (pre- and user-defined) geometric primitives.

element gml:_Geometry

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractGeometryType

properties

content	complex
substGrp	gml:_GML
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

complexTypes

gml:GeometryArrayPropertyType gml:GeometryPropertyType gml:LocationPropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

The "_Geometry" element is the abstract head of the substituition group for all geometry elements of GML 3. This includes pre-defined and user-defined geometry elements. Any geometry element must be a direct or indirect extension/restriction of AbstractGeometryType and must be directly or indirectly in the substitution group of "_Geometry".

appInfo

<sch:pattern>
	<sch:rule context="gml:_Geometry">
		<sch:extends rule="CRSLabels"/>
	</sch:rule>
</sch:pattern>

element gml:coord

diagram

namespace

http://www.opengis.net/gml

gml:EnvelopeType gml:LinearRingType gml:LineStringType gml:PointType

annotation

documentation

Deprecated with GML 3.0 and included for backwards compatibility with GML 2. Use the "pos" element instead.

element gml:coordinates

diagram

namespace

http://www.opengis.net/gml

gml:EnvelopeType gml:LinearRingType gml:LineStringType gml:PointType

attributes

Name	Type	Use	Default	Fixed	Annotation
decimal	xs:string		.
cs	xs:string		,
ts	xs:string

annotation

documentation

Deprecated with GML version 3.1.0.

element gml:curveArrayProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:CurveArrayPropertyType

element gml:curveProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:CurvePropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

appInfo

<sch:pattern>
	<sch:rule context="gml:curveProperty">
		<sch:extends rule="hrefOrContent"/>
	</sch:rule>
</sch:pattern>

documentation

This property element either references a curve via the XLink-attributes or contains the curve element. curveProperty is the predefined property which can be used by GML Application Schemas whenever a GML Feature has a property with a value that is substitutable for _Curve.

element gml:Envelope

diagram

namespace

http://www.opengis.net/gml

lowerCorner upperCorner gml:coord gml:pos gml:coordinates

used by

complexType

gml:BoundingShapeType

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

element gml:LineString

diagram

namespace

http://www.opengis.net/gml

type

gml:LineStringType

properties

content	complex
substGrp	gml:_Curve

children

gml:metaDataProperty gml:description gml:name gml:pos gml:pointProperty gml:pointRep gml:coord gml:posList gml:coordinates

used by

complexType

gml:LineStringPropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

element gml:lineStringProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:LineStringPropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Deprecated with GML 3.0 and included only for backwards compatibility with GML 2.0. Use "curveProperty" instead. This property element either references a line string via the XLink-attributes or contains the line string element.

element gml:Point

diagram

namespace

http://www.opengis.net/gml

type

gml:PointType

properties

content	complex
substGrp	gml:_GeometricPrimitive

children

gml:metaDataProperty gml:description gml:name gml:pos gml:coordinates gml:coord

used by

complexTypes

gml:PointArrayPropertyType gml:PointPropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

element gml:pointArrayProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:PointArrayPropertyType

element gml:pointProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:PointPropertyType

complexTypes	gml:LinearRingType gml:LineStringType
group	gml:geometricPositionGroup


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

appInfo

<sch:pattern>
	<sch:rule context="gml:pointProperty">
		<sch:extends rule="hrefOrContent"/>
	</sch:rule>
</sch:pattern>

documentation

This property element either references a point via the XLink-attributes or contains the point element. pointProperty is the predefined property which can be used by GML Application Schemas whenever a GML Feature has a property with a value that is substitutable for Point.

element gml:pointRep

diagram

namespace

http://www.opengis.net/gml

type

gml:PointPropertyType

gml:LinearRingType gml:LineStringType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Deprecated with GML version 3.1.0. Use "pointProperty" instead. Included for backwards compatibility with GML 3.0.0.

element gml:pos

diagram

namespace

http://www.opengis.net/gml

type

gml:DirectPositionType

complexTypes	gml:EnvelopeType gml:LinearRingType gml:LineStringType gml:PointType
group	gml:geometricPositionGroup

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

appInfo

<sch:pattern>
	<sch:rule context="gml:pos">
		<sch:extends rule="CRSLabels"/>
	</sch:rule>
</sch:pattern>

element gml:posList

diagram

namespace

http://www.opengis.net/gml

type

gml:DirectPositionListType

complexTypes	gml:LinearRingType gml:LineStringType
group	gml:geometricPositionListGroup

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

"count" allows to specify the number of direct positions in the list. If the attribute “count” is present then the attribute “srsDimension” shall be present, too.

annotation

appInfo

<sch:pattern>
	<sch:rule context="gml:posList">
		<sch:extends rule="CRSLabels"/>
	</sch:rule>
</sch:pattern>

appInfo

<sch:pattern>
	<sch:rule context="gml:posList">
		<sch:extends rule="Count"/>
	</sch:rule>
</sch:pattern>

element gml:vector

diagram

namespace

http://www.opengis.net/gml

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

appInfo

<sch:pattern>
	<sch:rule context="gml:vector">
		<sch:extends rule="CRSLabels"/>
	</sch:rule>
</sch:pattern>

group gml:geometricPositionGroup

diagram

namespace

http://www.opengis.net/gml

children

gml:pos gml:pointProperty

used by

group

gml:geometricPositionListGroup

annotation

documentation

A geometric position represented either by a DirectPosition or a Point.

group gml:geometricPositionListGroup

diagram

namespace

http://www.opengis.net/gml

children

gml:posList gml:pos gml:pointProperty

annotation

documentation

A list of geometric positions represented either by a DirectPosition or a Point.

complexType gml:AbstractCurveType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGeometricPrimitiveType

properties

base	gml:AbstractGeometricPrimitiveType
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

element	gml:_Curve
complexType	gml:LineStringType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

An abstraction of a curve to support the different levels of complexity. The curve can always be viewed as a geometric primitive, i.e. is continuous.

complexType gml:AbstractGeometricPrimitiveType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGeometryType

properties

base	gml:AbstractGeometryType
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

element	gml:_GeometricPrimitive
complexTypes	gml:AbstractCurveType gml:AbstractSurfaceType gml:PointType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

This is the abstract root type of the geometric primitives. A geometric primitive is a geometric object that is not decomposed further into other primitives in the system. All primitives are oriented in the direction implied by the sequence of their coordinate tuples.

complexType gml:AbstractGeometryType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGMLType

properties

base	gml:AbstractGMLType
abstract	true

children

gml:metaDataProperty gml:description gml:name

used by

element	gml:_Geometry
complexTypes	gml:AbstractGeometricPrimitiveType gml:AbstractRingType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

All geometry elements are derived directly or indirectly from this abstract supertype. A geometry element may have an identifying attribute ("gml:id"), a name (attribute "name") and a description (attribute "description"). It may be associated with a spatial reference system (attribute "srsName"). The following rules shall be adhered: - Every geometry type shall derive from this abstract type. - Every geometry element (i.e. an element of a geometry type) shall be directly or indirectly in the substitution group of _Geometry.

complexType gml:CoordType

diagram

namespace

http://www.opengis.net/gml

Represents a coordinate tuple in one, two, or three dimensions. Deprecated with GML 3.0 and replaced by DirectPositionType.

element gml:CoordType/X

diagram

namespace

http://www.opengis.net/gml

type

xs:decimal

properties

isRef	0
content	simple

element gml:CoordType/Y

diagram

namespace

http://www.opengis.net/gml

type

xs:decimal

properties

isRef	0
content	simple

element gml:CoordType/Z

diagram

namespace

http://www.opengis.net/gml

type

xs:decimal

properties

isRef	0
content	simple

complexType gml:CurveArrayPropertyType

diagram

namespace

http://www.opengis.net/gml

gml:curveArrayProperty

annotation

documentation

A container for an array of curves. The elements are always contained in the array property, referencing geometry elements or arrays of geometry elements is not supported.

complexType gml:CurvePropertyType

diagram

namespace

http://www.opengis.net/gml

gml:centerLineOf gml:curveProperty gml:edgeOf


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

A property that has a curve as its value domain can either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Either the reference or the contained element must be given, but neither both nor none.

complexType gml:DirectPositionListType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:doubleList

properties

base	gml:doubleList

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

"count" allows to specify the number of direct positions in the list. If the attribute “count” is present then the attribute “srsDimension” shall be present, too.

annotation

documentation

DirectPositionList instances hold the coordinates for a sequence of direct positions within the same coordinate reference system (CRS).

complexType gml:DirectPositionType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:doubleList

properties

base	gml:doubleList

used by

elements	gml:pos gml:EnvelopeType/lowerCorner gml:EnvelopeType/upperCorner
complexType	gml:VectorType

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

DirectPosition instances hold the coordinates for a position within some coordinate reference system (CRS). Since DirectPositions, as data types, will often be included in larger objects (such as geometry elements) that have references to CRS, the "srsName" attribute will in general be missing, if this particular DirectPosition is included in a larger element with such a reference to a CRS. In this case, the CRS is implicitly assumed to take on the value of the containing object's CRS.

complexType gml:EnvelopeType

diagram

namespace

http://www.opengis.net/gml

children

lowerCorner upperCorner gml:coord gml:pos gml:coordinates

used by

element	gml:Envelope
complexType	gml:EnvelopeWithTimePeriodType

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

Envelope defines an extent using a pair of positions defining opposite corners in arbitrary dimensions. The first direct position is the "lower corner" (a coordinate position consisting of all the minimal ordinates for each dimension for all points within the envelope), the second one the "upper corner" (a coordinate position consisting of all the maximal ordinates for each dimension for all points within the envelope).

element gml:EnvelopeType/lowerCorner

diagram

namespace

http://www.opengis.net/gml

type

gml:DirectPositionType

properties

isRef	0
content	complex

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

element gml:EnvelopeType/upperCorner

diagram

namespace

http://www.opengis.net/gml

type

gml:DirectPositionType

properties

isRef	0
content	complex

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

complexType gml:GeometricPrimitivePropertyType

diagram

namespace

http://www.opengis.net/gml

children

gml:_GeometricPrimitive


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

A property that has a geometric primitive as its value domain can either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Either the reference or the contained element must be given, but neither both nor none.

complexType gml:GeometryArrayPropertyType

diagram

namespace

http://www.opengis.net/gml

A container for an array of geometry elements. The elements are always contained in the array property, referencing geometry elements or arrays of geometry elements is not supported.

complexType gml:GeometryPropertyType

diagram

namespace

http://www.opengis.net/gml


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

A geometric property can either be any geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Note that either the reference or the contained element must be given, but not both or none.

complexType gml:LineStringPropertyType

diagram

namespace

http://www.opengis.net/gml

gml:lineStringProperty


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

This type is deprecated with GML 3 and shall not be used. It is included for backwards compatibility with GML 2. Use CurvePropertyType instead. A property that has a line string as its value domain can either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Either the reference or the contained element must be given, but neither both nor none.

complexType gml:LineStringType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractCurveType

properties

base	gml:AbstractCurveType

children

gml:metaDataProperty gml:description gml:name gml:pos gml:pointProperty gml:pointRep gml:coord gml:posList gml:coordinates

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

A LineString is a special curve that consists of a single segment with linear interpolation. It is defined by two or more coordinate tuples, with linear interpolation between them. It is backwards compatible with the LineString of GML 2, GM_LineString of ISO 19107 is implemented by LineStringSegment.

complexType gml:PointArrayPropertyType

diagram

namespace

http://www.opengis.net/gml

gml:pointArrayProperty

annotation

documentation

A container for an array of points. The elements are always contained in the array property, referencing geometry elements or arrays of geometry elements is not supported.

complexType gml:PointPropertyType

diagram

namespace

http://www.opengis.net/gml

gml:centerOf gml:pointProperty gml:pointRep gml:position


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

A property that has a point as its value domain can either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Either the reference or the contained element must be given, but neither both nor none.

complexType gml:PointType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGeometricPrimitiveType

properties

base	gml:AbstractGeometricPrimitiveType

children

gml:metaDataProperty gml:description gml:name gml:pos gml:coordinates gml:coord

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

A Point is defined by a single coordinate tuple.

complexType gml:VectorType

diagram

namespace

http://www.opengis.net/gml

type

restriction of gml:DirectPositionType

properties

base	gml:DirectPositionType

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

A Vector is an ordered set of numbers called coordinates that represent a position in a coordinate reference system (CRS). For some application the components of the position may be adjusted to yield a unit vector.

attributeGroup gml:SRSInformationGroup

namespace

http://www.opengis.net/gml

used by

attributeGroup

gml:SRSReferenceGroup

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

Optional additional and redundant information for a CRS to simplify use when a more complete definition of the CRS is not needed. This information shall be the same as included in the more complete definition of the CRS, referenced by the srsName attribute. When the srsName attribute is included, either both or neither of the axisLabels and uomLabels attributes shall be included. When the srsName attribute is omitted, both of these attributes shall be omitted.

attributeGroup gml:SRSReferenceGroup

namespace

http://www.opengis.net/gml

used by

complexTypes

gml:AbstractGeometryType gml:DirectPositionListType gml:DirectPositionType gml:EnvelopeType

In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.

The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.

Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.

Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.

annotation

documentation

Optional reference to the CRS used by this geometry, with optional additional information to simplify use when a more complete definition of the CRS is not needed.

element gml:_association

diagram

namespace

http://www.opengis.net/gml

type

gml:AssociationType

properties

content	complex
abstract	true


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:_GML

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractGMLType

properties

content	complex
substGrp	gml:_Object
abstract	true

children

gml:metaDataProperty gml:description gml:name

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Global element which acts as the head of a substitution group that may include any element which is a GML feature, object, geometry or complex value

element gml:_MetaData

diagram

namespace

http://www.opengis.net/gml

type

gml:AbstractMetaDataType

properties

content	complex
mixed	true
substGrp	gml:_Object
abstract	true

used by

complexType

gml:MetaDataPropertyType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Abstract element which acts as the head of a substitution group for packages of MetaData properties.

element gml:_Object

diagram

namespace

http://www.opengis.net/gml

gml:ArrayAssociationType gml:AssociationType

annotation

documentation

This abstract element is the head of a substitutionGroup hierararchy which may contain either simpleContent or complexContent elements.  It is used to assert the model position of "class" elements declared in other GML schemas.

element gml:_reference

diagram

namespace

http://www.opengis.net/gml

type

gml:ReferenceType

properties

content	complex
abstract	true


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:_strictAssociation

diagram

namespace

http://www.opengis.net/gml

type

gml:AssociationType

properties

content	complex
abstract	true


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

appInfo

<sch:pattern name="refAndContent co-occurence prohibited">
	<sch:rule context="gml:_strictAssociation">
		<sch:extends rule="hrefOrContent"/>
	</sch:rule>
</sch:pattern>

documentation

must carry a reference to an object or contain an object but not both

element gml:Array

diagram

namespace

http://www.opengis.net/gml

type

gml:ArrayType

properties

content	complex
substGrp	gml:_GML

children

gml:metaDataProperty gml:description gml:name gml:members

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Generic GML element to contain a homogeneous array of GML _Objects

element gml:Bag

diagram

namespace

http://www.opengis.net/gml

type

gml:BagType

properties

content	complex
substGrp	gml:_GML

children

gml:metaDataProperty gml:description gml:name gml:member gml:members

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Generic GML element to contain a heterogeneous collection of GML _Objects

element gml:description

diagram

namespace

http://www.opengis.net/gml

complexType	gml:DefinitionType
group	gml:StandardObjectProperties


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Contains a simple text description of the object, or refers to an external description.

element gml:GenericMetaData

diagram

namespace

http://www.opengis.net/gml

type

gml:GenericMetaDataType

properties

content	complex
mixed	true
substGrp	gml:_MetaData

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Concrete element in the _MetaData substitution group, which permits any well-formed XML content.  Intended to act as a container for metadata defined in external schemas, for which it is not possible to add the concrete components to the GML _MetaData substitution group directly. Deprecated with GML version 3.1.0.

element gml:member

diagram

namespace

http://www.opengis.net/gml


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:members

diagram

namespace

http://www.opengis.net/gml

type

gml:ArrayAssociationType

gml:ArrayType gml:BagType

element gml:metaDataProperty

diagram

namespace

http://www.opengis.net/gml

type

gml:MetaDataPropertyType

complexType	gml:DefinitionType
group	gml:StandardObjectProperties


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Contains or refers to a metadata package that contains metadata properties.

element gml:name

diagram

namespace

http://www.opengis.net/gml

complexType	gml:DefinitionType
group	gml:StandardObjectProperties

attributes

Name	Type	Use	Default	Fixed	Annotation
codeSpace	xs:anyURI	optional

annotation

documentation

Label for the object, normally a descriptive name. An object may have several names, typically assigned by different authorities.  The authority for a name is indicated by the value of its (optional) codeSpace attribute.  The name may or may not be unique, as determined by the rules of the organization responsible for the codeSpace.

group gml:StandardObjectProperties

diagram

namespace

http://www.opengis.net/gml

children

gml:metaDataProperty gml:description gml:name

used by

complexTypes

gml:AbstractGMLType gml:BoundedFeatureType

annotation

documentation

This content model group makes it easier to construct types that 
      derive from AbstractGMLType and its descendents "by restriction".  
      A reference to the group saves having to enumerate the standard object properties.

complexType gml:AbstractGMLType

diagram

namespace

http://www.opengis.net/gml

gml:metaDataProperty gml:description gml:name

used by

element	gml:_GML
complexTypes	gml:AbstractFeatureType gml:AbstractGeometryType gml:AbstractTimeObjectType gml:ArrayType gml:BagType gml:DefinitionType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

All complexContent GML elements are directly or indirectly derived from this abstract supertype 
	to establish a hierarchy of GML types that may be distinguished from other XML types by their ancestry. 
	Elements in this hierarchy may have an ID and are thus referenceable.

complexType gml:AbstractMetaDataType

diagram

namespace

http://www.opengis.net/gml

properties

mixed	true
abstract	true

used by

element	gml:_MetaData
complexType	gml:GenericMetaDataType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

 An abstract base type for complex metadata types.

complexType gml:ArrayAssociationType

diagram

namespace

http://www.opengis.net/gml

  A base for derived types used to specify complex types containing an array of objects, by unspecified UML association - either composition or aggregation.  An instance of this type contains elements representing Objects.

Ideally this type would be derived by extension of AssociationType.  
However, this leads to a non-deterministic content model, since both the base and the extension have minOccurs="0", and is thus prohibited in XML Schema.

complexType gml:ArrayType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGMLType

properties

base	gml:AbstractGMLType

children

gml:metaDataProperty gml:description gml:name gml:members

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

A non-abstract generic collection type that can be used as a document element for a homogeneous collection of any GML types - Geometries, Topologies, Features ...

complexType gml:AssociationType

diagram

namespace

http://www.opengis.net/gml

children

gml:_Object

used by

elements	gml:_association gml:_strictAssociation gml:member
complexTypes	LocationChildGenericType LocationChildMtnRangeType LocationParentGenericType LocationParentMtnRangeType LocationReferenceType ObservationAssociationType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

  A pattern or base for derived types used to specify complex types corresponding to an  unspecified UML association - either composition or aggregation.  Restricts the cardinality of Objects contained in the association to a maximum of one.  An instance of this type can contain an element representing an Object, or serve as a pointer to a remote Object.  

Descendents of this type can be restricted in an application schema to 
* allow only specified classes as valid participants in the aggregation
* allow only association by reference (i.e. empty the content model) or by value (i.e. remove the xlinks).    

When used for association by reference, the value of the gml:remoteSchema attribute can be used to locate a schema fragment that constrains the target instance.   

In many cases it is desirable to impose the constraint prohibiting the occurence of both reference and value in the same instance, as that would be ambiguous.  This is accomplished by adding a directive in the annotation element of the element declaration.  This directive can be in the form of normative prose, or can use a Schematron pattern to automatically constrain co-occurrence - see the declaration for _strictAssociation below.   

If co-occurence is not prohibited, then both a link and content may be present.  If this occurs in an instance, then the rule for interpretation is that the instance found by traversing the href provides the normative value of the property, and should be used when possible.  The value(s) included as content may be used if the remote instance cannot be resolved.  This may be considered to be a "cached" version of the value(s).

complexType gml:BagType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractGMLType

properties

base	gml:AbstractGMLType

children

gml:metaDataProperty gml:description gml:name gml:member gml:members

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

A non-abstract generic collection type that can be used as a document element for a collection of any GML types - Geometries, Topologies, Features ...

“FeatureCollections” may only contain Features.  “GeometryCollections” may only contain Geometry’s.  “Bags” are less constrained – they must contain objects that are substitutable for gml:_Object.  This may mix several levels, including Features, Definitions, Dictionaries, Geometries etc.  

The content model would ideally be 
   member 0..*
   members 0..1
   member 0..*
for maximum flexibility in building a collection from both homogeneous and distinct components: 
included "member" elements each contain a single Object
an included "members" element contains a set of Objects 

However, this is non-deterministic, thus prohibited by XSD.

complexType gml:GenericMetaDataType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:AbstractMetaDataType

properties

base	gml:AbstractMetaDataType
mixed	true

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Deprecated with GML version 3.1.0.

complexType gml:MetaDataPropertyType

diagram

namespace

http://www.opengis.net/gml


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

Base type for complex metadata property types.

complexType gml:ReferenceType

diagram

namespace

http://www.opengis.net/gml

used by

elements

gml:_reference gml:definitionRef gml:BaseUnitType/unitsSystem


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

  A pattern or base for derived types used to specify complex types corresponding to a UML aggregation association.  An instance of this type serves as a pointer to a remote Object.

complexType gml:StringOrRefType

diagram

namespace

http://www.opengis.net/gml

type

extension of xs:string

gml:description gml:LocationString gml:quantityType LOC_DESCRIPTION


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation


This type is available wherever there is a need for a "text" type property. It is of string type, so the text can be included inline, but the value can also be referenced remotely via xlinks from the AssociationAttributeGroup. If the remote reference is present, then the value obtained by traversing the link should be used, and the string content of the element can be used for an annotation.

attributeGroup gml:AssociationAttributeGroup

namespace

http://www.opengis.net/gml

used by

complexTypes

AbstractLocationCollectionType AbstractLocationType ExternalDataType gml:AssociationType gml:CurvePropertyType gml:DictionaryEntryType gml:FeaturePropertyType gml:GeometricPrimitivePropertyType gml:GeometryPropertyType gml:LineStringPropertyType gml:LocationPropertyType gml:MetaDataPropertyType gml:PointPropertyType gml:PolygonPropertyType gml:ReferenceType gml:StringOrRefType gml:SurfacePropertyType gml:TimeGeometricPrimitivePropertyType gml:TimeInstantPropertyType gml:TimePeriodPropertyType gml:TimePrimitivePropertyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Attribute group used to enable property elements to refer to their value remotely. It contains the “simple link” components from xlinks.xsd, with all members “optional”, and the remoteSchema attribute, which is also optional.  These attributes can be attached to any element, thus allowing it to act as a pointer. The 'remoteSchema' attribute allows an element  that carries link attributes to indicate that the element is declared  in a remote schema rather than by the schema that constrains the current document instance.

element gml:angle

diagram

namespace

http://www.opengis.net/gml

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

element gml:decimalMinutes

diagram

namespace

http://www.opengis.net/gml

type

gml:DecimalMinutesType

minInclusive	0.00
maxExclusive	60.00

element gml:degrees

diagram

namespace

http://www.opengis.net/gml

Name	Type	Use	Default	Fixed	Annotation
direction

element gml:dmsAngle

diagram

namespace

http://www.opengis.net/gml

gml:degrees gml:decimalMinutes gml:minutes gml:seconds

http://www.opengis.net/gml

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

element gml:minutes

diagram

namespace

http://www.opengis.net/gml

http://www.opengis.net/gml

minInclusive	0.00
maxExclusive	60.00

complexType gml:AngleChoiceType

diagram

namespace

http://www.opengis.net/gml

children

gml:angle gml:dmsAngle

annotation

documentation

Value of an angle quantity provided in either degree-minute-second format or single value format.

complexType gml:AngleType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:MeasureType

properties

base	gml:MeasureType

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

Value of an angle quantity recorded as a single number, with its units. Uses the MeasureType with the restriction that the unit of measure referenced by uom must be suitable for an angle, such as degrees or radians.

complexType gml:AreaType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:MeasureType

properties

base	gml:MeasureType

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

Value of a spatial area quantity, with its units. Uses the MeasureType with the restriction that the unit of measure referenced by uom must be suitable for an area, such as square metres or square miles.

complexType gml:DegreesType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:DegreeValueType

properties

base	gml:DegreeValueType

Name	Type	Use	Default	Fixed	Annotation
direction

annotation

documentation

Integer number of degrees, plus the angle direction. This element can be used for geographic Latitude and Longitude. For Latitude, the XML attribute direction can take the values "N" or "S", meaning North or South of the equator. For Longitude, direction can take the values "E" or "W", meaning East or West of the prime meridian. This element can also be used for other angles. In that case, the direction can take the values "+" or "-" (of SignType), in the specified rotational direction from a specified reference direction.

complexType gml:DMSAngleType

diagram

namespace

http://www.opengis.net/gml

children

gml:degrees gml:decimalMinutes gml:minutes gml:seconds

Angle value provided in degree-minute-second or degree-minute format.

complexType gml:GridLengthType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:MeasureType

properties

base	gml:MeasureType

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

Value of a length (or distance) quantity in a grid, where the grid spacing does not have any associated physical units, or does not have a constant physical spacing. This grid length will often be used in a digital image grid, where the base units are likely to be pixel spacings. Uses the MeasureType with the restriction that the unit of measure referenced by uom must be suitable for length along the axes of a grid, such as pixel spacings or grid spacings.

complexType gml:LengthType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:MeasureType

properties

base	gml:MeasureType

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

Value of a length (or distance) quantity, with its units. Uses the MeasureType with the restriction that the unit of measure referenced by uom must be suitable for a length, such as metres or feet.

complexType gml:ScaleType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:MeasureType

properties

base	gml:MeasureType

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

Value of a scale factor (or ratio) that has no physical unit. Uses the MeasureType with the restriction that the unit of measure referenced by uom must be suitable for a scale factor, such as percent, permil, or parts-per-million.

complexType gml:SpeedType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:MeasureType

properties

base	gml:MeasureType

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

Value of a speed, with its units. Uses the MeasureType with the restriction that the unit of measure referenced by uom must be suitable for a velocity, such as metres per second or miles per hour.

complexType gml:TimeType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:MeasureType

properties

base	gml:MeasureType

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

Value of a time or temporal quantity, with its units. Uses the MeasureType with the restriction that the unit of measure referenced by uom must be suitable for a time value, such as seconds or weeks.

complexType gml:VolumeType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:MeasureType

properties

base	gml:MeasureType

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

Value of a spatial volume quantity, with its units. Uses the MeasureType with the restriction that the unit of measure referenced by uom must be suitable for a volume, such as cubic metres or cubic feet.

simpleType gml:ArcMinutesType

namespace

http://www.opengis.net/gml

type

restriction of xs:nonNegativeInteger

Integer number of arc-minutes in a degree-minute-second angular value.

simpleType gml:ArcSecondsType

namespace

http://www.opengis.net/gml

type

restriction of xs:decimal

minInclusive	0.00
maxExclusive	60.00

annotation

documentation

Number of arc-seconds in a degree-minute-second angular value.

simpleType gml:DecimalMinutesType

namespace

http://www.opengis.net/gml

type

restriction of xs:decimal

minInclusive	0.00
maxExclusive	60.00

annotation

documentation

Decimal number of arc-minutes in a degree-minute angular value.

simpleType gml:DegreeValueType

namespace

http://www.opengis.net/gml

type

restriction of xs:nonNegativeInteger

Integer number of degrees in a degree-minute-second or degree-minute angular value, without indication of direction.

element gml:Null

diagram

namespace

http://www.opengis.net/gml

gml:BoundingShapeType gml:LocationPropertyType

complexType gml:CodeListType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:NameList

properties

base	gml:NameList

attributes

Name	Type	Use	Default	Fixed	Annotation
codeSpace	xs:anyURI	optional

annotation

documentation

List of values on a uniform nominal scale.  List of text tokens.   
      In a list context a token should not include any spaces, so xsd:Name is used instead of xsd:string.   
      If a codeSpace attribute is present, then its value is a reference to 
      a Reference System for the value, a dictionary or code list.

complexType gml:CodeOrNullListType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:NameOrNullList

properties

base	gml:NameOrNullList

attributes

Name	Type	Use	Default	Fixed	Annotation
codeSpace	xs:anyURI	optional

annotation

documentation

List of values on a uniform nominal scale.  List of text tokens.   
      In a list context a token should not include any spaces, so xsd:Name is used instead of xsd:string.  
      A member of the list may be a typed null.  
      If a codeSpace attribute is present, then its value is a reference to 
      a Reference System for the value, a dictionary or code list.

complexType gml:CodeType

diagram

namespace

http://www.opengis.net/gml

type

extension of xs:string

gml:catalogSymbol gml:LocationKeyWord gml:name LOC_NAME

attributes

Name	Type	Use	Default	Fixed	Annotation
codeSpace	xs:anyURI	optional

annotation

documentation

Name or code with an (optional) authority.  Text token.  
      If the codeSpace attribute is present, then its value should identify a dictionary, thesaurus 
      or authority for the term, such as the organisation who assigned the value, 
      or the dictionary from which it is taken.  
      A text string with an optional codeSpace attribute.

complexType gml:CoordinatesType

diagram

namespace

http://www.opengis.net/gml

type

extension of xs:string

Name	Type	Use	Default	Fixed	Annotation
decimal	xs:string		.
cs	xs:string		,
ts	xs:string

annotation

documentation

Tables or arrays of tuples.  
        May be used for text-encoding of values from a table.  
        Actually just a string, but allows the user to indicate which characters are used as separators.  
        The value of the 'cs' attribute is the separator for coordinate values, 
        and the value of the 'ts' attribute gives the tuple separator (a single space by default); 
        the default values may be changed to reflect local usage.
        Defaults to CSV within a tuple, space between tuples.  
        However, any string content will be schema-valid.

complexType gml:MeasureListType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:doubleList

properties

base	gml:doubleList

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

List of numbers with a uniform scale.  
      The value of uom (Units Of Measure) attribute is a reference to 
      a Reference System for the amount, either a ratio or position scale.

complexType gml:MeasureOrNullListType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:doubleOrNullList

properties

base	gml:doubleOrNullList

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

List of numbers with a uniform scale.  
      A member of the list may be a typed null. 
      The value of uom (Units Of Measure) attribute is a reference to 
      a Reference System for the amount, either a ratio or position scale.

complexType gml:MeasureType

diagram

namespace

http://www.opengis.net/gml

type

extension of xs:double

element	gml:measure
complexTypes	gml:AngleType gml:AreaType gml:GridLengthType gml:LengthType gml:ScaleType gml:SpeedType gml:TimeType gml:VolumeType

attributes

Name	Type	Use	Default	Fixed	Annotation
uom	xs:anyURI	required

annotation

documentation

Number with a scale.  
      The value of uom (Units Of Measure) attribute is a reference to a Reference System for the amount, either a ratio or position scale.

simpleType gml:booleanList

namespace

http://www.opengis.net/gml

XML List based on XML Schema boolean type.  An element of this type contains a space-separated list of boolean values {0,1,true,false}

simpleType gml:booleanOrNull

namespace

http://www.opengis.net/gml

type

union of (gml:NullEnumeration, xs:boolean, xs:anyURI)

used by

simpleType

gml:booleanOrNullList

annotation

documentation

Union of the XML Schema boolean type and the GML Nulltype.  An element which uses this type may have content which is either a boolean {0,1,true,false} or a value from Nulltype

simpleType gml:booleanOrNullList

namespace

http://www.opengis.net/gml

type

list of gml:booleanOrNull

annotation

documentation

XML List based on the union type defined above.  An element declared with this type contains a space-separated list of boolean values {0,1,true,false} with null values interspersed as needed

simpleType gml:doubleList

namespace

http://www.opengis.net/gml

gml:DirectPositionListType gml:DirectPositionType gml:MeasureListType

annotation

documentation

XML List based on XML Schema double type.  An element of this type contains a space-separated list of double values

simpleType gml:doubleOrNull

namespace

http://www.opengis.net/gml

type

union of (gml:NullEnumeration, xs:double, xs:anyURI)

Union of the XML Schema double type and the GML Nulltype.  An element which uses this type may have content which is either a double or a value from Nulltype

simpleType gml:doubleOrNullList

namespace

http://www.opengis.net/gml

type

list of gml:doubleOrNull

used by

complexType

gml:MeasureOrNullListType

annotation

documentation

XML List based on the union type defined above.  An element declared with this type contains a space-separated list of double values with null values interspersed as needed

simpleType gml:integerList

namespace

http://www.opengis.net/gml

XML List based on XML Schema integer type.  An element of this type contains a space-separated list of integer values

simpleType gml:integerOrNull

namespace

http://www.opengis.net/gml

type

union of (gml:NullEnumeration, xs:integer, xs:anyURI)

used by

simpleType

gml:integerOrNullList

annotation

documentation

Union of the XML Schema integer type and the GML Nulltype.  An element which uses this type may have content which is either an integer or a value from Nulltype

simpleType gml:integerOrNullList

namespace

http://www.opengis.net/gml

type

list of gml:integerOrNull

annotation

documentation

XML List based on the union type defined above.  An element declared with this type contains a space-separated list of integer values with null values interspersed as needed

simpleType gml:NameList

namespace

http://www.opengis.net/gml

XML List based on XML Schema Name type.  An element of this type contains a space-separated list of Name values

simpleType gml:NameOrNull

namespace

http://www.opengis.net/gml

type

union of (gml:NullEnumeration, xs:Name, xs:anyURI)

Union of the XML Schema Name type and the GML Nulltype.  An element which uses this type may have content which is either a Name or a value from Nulltype.  Note that a "Name" may not contain whitespace.

simpleType gml:NameOrNullList

namespace

http://www.opengis.net/gml

type

list of gml:NameOrNull

used by

complexType

gml:CodeOrNullListType

annotation

documentation

XML List based on the union type defined above.  An element declared with this type contains a space-separated list of Name values with null values interspersed as needed

simpleType gml:NCNameList

namespace

http://www.opengis.net/gml

gml:SRSInformationGroup/@axisLabels gml:SRSInformationGroup/@uomLabels

annotation

documentation

A set of values, representing a list of token with the lexical value space of NCName. The tokens are seperated by whitespace.

simpleType gml:NullEnumeration

namespace

http://www.opengis.net/gml

type

union of (restriction of xs:string, restriction of xs:string)

used by

simpleTypes

gml:booleanOrNull gml:doubleOrNull gml:integerOrNull gml:NameOrNull gml:NullType gml:stringOrNull

annotation

documentation

 Some common reasons for a null value:   
			
        innapplicable - the object does not have a value
        missing - The correct value is not readily available to the sender of this data.  
                           Furthermore, a correct value may not exist.
        template - the value will be available later
        unknown - The correct value is not known to, and not computable by, the sender of this data. 
                           However, a correct value probably exists.
        withheld - the value is not divulged 
        
        other:reason - as indicated by "reason" string
        
        Specific communities may agree to assign more strict semantics when these terms are used in a particular context.

simpleType gml:NullType

namespace

http://www.opengis.net/gml

type

union of (gml:NullEnumeration, xs:anyURI)

Utility type for null elements.  The value may be selected from one of the enumerated tokens, or may be a URI in which case this should identify a resource which describes the reason for the null.

simpleType gml:QNameList

namespace

http://www.opengis.net/gml

A set of values, representing a list of token with the lexical value space of QName. The tokens are seperated by whitespace.

simpleType gml:SignType

namespace

http://www.opengis.net/gml

type

restriction of xs:string

enumeration	-
enumeration	+

annotation

documentation

Utility type used in various places 
      - e.g. to indicate the direction of topological objects;
      "+" for forwards, or "-" for backwards.

simpleType gml:stringOrNull

namespace

http://www.opengis.net/gml

type

union of (gml:NullEnumeration, xs:string, xs:anyURI)

annotation

documentation

Union of the XML Schema string type and the GML Nulltype.  An element which uses this type may have content which is either a string or a value from Nulltype.  Note that a "string" may contain whitespace.

attributeGroup xlink:arcLink

namespace

http://www.w3.org/1999/xlink


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

attributeGroup xlink:emptyLink

namespace

http://www.w3.org/1999/xlink

attributes

Name	Type	Use	Default	Fixed	Annotation
type	xs:string			none

attributeGroup xlink:extendedLink

namespace

http://www.w3.org/1999/xlink

attributes

Name	Type	Use	Default	Fixed	Annotation
type	xs:string			extended
xlink:role		optional
xlink:title		optional

attributeGroup xlink:locatorLink

namespace

http://www.w3.org/1999/xlink

attributes

Name	Type	Use	Default	Fixed	Annotation
type	xs:string			locator
xlink:href		required
xlink:role		optional
xlink:title		optional
xlink:label		optional

attributeGroup xlink:resourceLink

namespace

http://www.w3.org/1999/xlink

attributes

Name	Type	Use	Default	Fixed	Annotation
type	xs:string			resource
xlink:role		optional
xlink:title		optional
xlink:label		optional

attributeGroup xlink:simpleLink

namespace

http://www.w3.org/1999/xlink

used by

attributeGroup

gml:AssociationAttributeGroup


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

attributeGroup xlink:titleLink

namespace

http://www.w3.org/1999/xlink

attributes

Name	Type	Use	Default	Fixed	Annotation
type	xs:string			title

element gml:BaseUnit

diagram

namespace

http://www.opengis.net/gml

type

gml:BaseUnitType

properties

content	complex
substGrp	gml:UnitDefinition

children

gml:metaDataProperty gml:description gml:name gml:quantityType gml:catalogSymbol unitsSystem

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:catalogSymbol

diagram

namespace

http://www.opengis.net/gml

gml:UnitDefinitionType

attributes

Name	Type	Use	Default	Fixed	Annotation
codeSpace	xs:anyURI	optional

annotation

documentation

For global understanding of a unit of measure, it is often possible to reference an item in a catalog of units, using a symbol in that catalog. The "codeSpace" attribute in "CodeType" identifies a namespace for the catalog symbol value, and might reference the catalog. The "string" value in "CodeType" contains the value of a symbol that is unique within this catalog namespace. This symbol often appears explicitly in the catalog, but it could be a combination of symbols using a specified algebra of units. For example, the symbol "cm" might indicate that it is the "m" symbol combined with the "c" prefix.

element gml:ConventionalUnit

diagram

namespace

http://www.opengis.net/gml

type

gml:ConventionalUnitType

properties

content	complex
substGrp	gml:UnitDefinition

children

gml:metaDataProperty gml:description gml:name gml:quantityType gml:catalogSymbol gml:conversionToPreferredUnit gml:roughConversionToPreferredUnit gml:derivationUnitTerm

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:conversionToPreferredUnit

diagram

namespace

http://www.opengis.net/gml

type

gml:ConversionToPreferredUnitType

gml:ConventionalUnitType

Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.

annotation

documentation

This element is included when this unit has an accurate conversion to the preferred unit for this quantity type.

element gml:derivationUnitTerm

diagram

namespace

http://www.opengis.net/gml

type

gml:DerivationUnitTermType

gml:ConventionalUnitType gml:DerivedUnitType

Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.

exponent

xs:integer

element gml:DerivedUnit

diagram

namespace

http://www.opengis.net/gml

type

gml:DerivedUnitType

properties

content	complex
substGrp	gml:UnitDefinition

children

gml:metaDataProperty gml:description gml:name gml:quantityType gml:catalogSymbol gml:derivationUnitTerm

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:quantityType

diagram

namespace

http://www.opengis.net/gml

gml:UnitDefinitionType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

Informal description of the phenomenon or type of quantity that is measured or observed. For example, "length", "angle", "time", "pressure", or "temperature". When the quantity is the result of an observation or measurement, this term is known as Observable Type or Measurand.

element gml:roughConversionToPreferredUnit

diagram

namespace

http://www.opengis.net/gml

type

gml:ConversionToPreferredUnitType

gml:ConventionalUnitType

Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.

annotation

documentation

This element is included when the correct definition of this unit is unknown, but this unit has a rough or inaccurate conversion to the preferred unit for this quantity type.

element gml:UnitDefinition

diagram

namespace

http://www.opengis.net/gml

type

gml:UnitDefinitionType

properties

content	complex
substGrp	gml:Definition

children

gml:metaDataProperty gml:description gml:name gml:quantityType gml:catalogSymbol

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:unitOfMeasure

diagram

namespace

http://www.opengis.net/gml

type

gml:UnitOfMeasureType

Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.

complexType gml:BaseUnitType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:UnitDefinitionType

properties

base	gml:UnitDefinitionType

children

gml:metaDataProperty gml:description gml:name gml:quantityType gml:catalogSymbol unitsSystem

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Definition of a unit of measure which is a base unit from the system of units.  A base unit cannot be derived by combination of other base units within this system.  Sometimes known as "fundamental unit".

element gml:BaseUnitType/unitsSystem

diagram

namespace

http://www.opengis.net/gml

type

gml:ReferenceType

properties

isRef	0
content	complex


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

complexType gml:ConventionalUnitType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:UnitDefinitionType

properties

base	gml:UnitDefinitionType

children

gml:metaDataProperty gml:description gml:name gml:quantityType gml:catalogSymbol gml:conversionToPreferredUnit gml:roughConversionToPreferredUnit gml:derivationUnitTerm

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Definition of a unit of measure which is related to a preferred unit for this quantity type through a conversion formula.  A method for deriving this unit by algebraic combination of more primitive units, may also be provided.

complexType gml:ConversionToPreferredUnitType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:UnitOfMeasureType

properties

base	gml:UnitOfMeasureType

gml:conversionToPreferredUnit gml:roughConversionToPreferredUnit

Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.

annotation

documentation

Relation of a unit to the preferred unit for this quantity type, specified by an arithmetic conversion (scaling and/or offset). A preferred unit is either a base unit or a derived unit selected for all units of one quantity type. The mandatory attribute "uom" shall reference the preferred unit that this conversion applies to. The conversion is specified by one of two alternative elements: "factor" or "formula".

element gml:ConversionToPreferredUnitType/factor

diagram

namespace

http://www.opengis.net/gml

type

xs:double

properties

isRef	0
content	simple

annotation

documentation

Specification of the scale factor by which a value using this unit of measure can be multiplied to obtain the corresponding value using the preferred unit of measure.

element gml:ConversionToPreferredUnitType/formula

diagram

namespace

http://www.opengis.net/gml

type

gml:FormulaType

properties

isRef	0
content	complex

Specification of the formula by which a value using this unit of measure can be converted to obtain the corresponding value using the preferred unit of measure.

complexType gml:DerivationUnitTermType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:UnitOfMeasureType

properties

base	gml:UnitOfMeasureType

used by

element

gml:derivationUnitTerm

Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.

Definition of one unit term for a derived unit of measure. This unit term references another unit of measure (uom) and provides an integer exponent applied to that unit in defining the compound unit. The exponent can be positive or negative, but not zero.

complexType gml:DerivedUnitType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:UnitDefinitionType

properties

base	gml:UnitDefinitionType

children

gml:metaDataProperty gml:description gml:name gml:quantityType gml:catalogSymbol gml:derivationUnitTerm

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Definition of a unit of measure which is defined through algebraic combination of more primitive units, which are usually base units from a particular system of units. Derived units based directly on base units are usually preferred for quantities other than the base units or fundamental quantities within a system.  If a derived unit is not the preferred unit, the ConventionalUnit element should be used instead.

complexType gml:FormulaType

diagram

namespace

http://www.opengis.net/gml

gml:ConversionToPreferredUnitType/formula

annotation

documentation

Paremeters of a simple formula by which a value using this unit of measure can be converted to the corresponding value using the preferred unit of measure. The formula element contains elements a, b, c and d, whose values use the XML Schema type "double". These values are used in the formula y = (a + bx) / (c + dx), where x is a value using this unit, and y is the corresponding value using the preferred unit. The elements a and d are optional, and if values are not provided, those parameters are considered to be zero. If values are not provided for both a and d, the formula is equivalent to a fraction with numerator and denominator parameters.

element gml:FormulaType/a

diagram

namespace

http://www.opengis.net/gml

type

xs:double

properties

isRef	0
content	simple

element gml:FormulaType/b

diagram

namespace

http://www.opengis.net/gml

type

xs:double

properties

isRef	0
content	simple

element gml:FormulaType/c

diagram

namespace

http://www.opengis.net/gml

type

xs:double

properties

isRef	0
content	simple

element gml:FormulaType/d

diagram

namespace

http://www.opengis.net/gml

type

xs:double

properties

isRef	0
content	simple

complexType gml:UnitDefinitionType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:DefinitionType

properties

base	gml:DefinitionType

children

gml:metaDataProperty gml:description gml:name gml:quantityType gml:catalogSymbol

used by

element	gml:UnitDefinition
complexTypes	gml:BaseUnitType gml:ConventionalUnitType gml:DerivedUnitType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

Definition of a unit of measure (or uom). The definition includes a quantityType property, which indicates the phenomenon to which the units apply, and a catalogSymbol, which gives the short symbol used for this unit. This element is used when the relationship of this unit to other units or units systems is unknown.

complexType gml:UnitOfMeasureType

diagram

namespace

http://www.opengis.net/gml

used by

element	gml:unitOfMeasure
complexTypes	gml:ConversionToPreferredUnitType gml:DerivationUnitTermType

Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.

annotation

documentation

Reference to a unit of measure definition that applies to all the numerical values described by the element containing this element. Notice that a complexType which needs to include the uom attribute can do so by extending this complexType. Alternately, this complexType can be used as a pattern for a new complexType.

element gml:Definition

diagram

namespace

http://www.opengis.net/gml

type

gml:DefinitionType

properties

content	complex
substGrp	gml:_GML

children

gml:metaDataProperty gml:description gml:name

used by

complexType

gml:DictionaryEntryType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:DefinitionCollection

diagram

namespace

http://www.opengis.net/gml

type

gml:DictionaryType

properties

content	complex
substGrp	gml:Definition

children

gml:metaDataProperty gml:description gml:name gml:dictionaryEntry gml:indirectEntry

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:definitionMember

diagram

namespace

http://www.opengis.net/gml

type

gml:DictionaryEntryType

properties

content	complex
substGrp	gml:dictionaryEntry


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:DefinitionProxy

diagram

namespace

http://www.opengis.net/gml

type

gml:DefinitionProxyType

properties

content	complex
substGrp	gml:Definition

children

gml:metaDataProperty gml:description gml:name gml:definitionRef

used by

complexType

gml:IndirectEntryType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:definitionRef

diagram

namespace

http://www.opengis.net/gml

gml:DefinitionProxyType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:Dictionary

diagram

namespace

http://www.opengis.net/gml

type

gml:DictionaryType

properties

content	complex
substGrp	gml:Definition

children

gml:metaDataProperty gml:description gml:name gml:dictionaryEntry gml:indirectEntry

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

element gml:dictionaryEntry

diagram

namespace

http://www.opengis.net/gml

type

gml:DictionaryEntryType


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

element gml:indirectEntry

diagram

namespace

http://www.opengis.net/gml

type

gml:IndirectEntryType

complexType gml:DefinitionProxyType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:DefinitionType

properties

base	gml:DefinitionType

children

gml:metaDataProperty gml:description gml:name gml:definitionRef

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

A proxy entry in a dictionary of definitions. An element of this type contains a reference to a remote definition object. This entry is expected to be convenient in allowing multiple elements in one XML document to contain short (abbreviated XPointer) references, which are resolved to an external definition provided in a Dictionary element in the same XML document.

complexType gml:DefinitionType

diagram

namespace

http://www.opengis.net/gml

type

restriction of gml:AbstractGMLType

properties

base	gml:AbstractGMLType

children

gml:metaDataProperty gml:description gml:name

used by

element	gml:Definition
complexTypes	gml:DefinitionProxyType gml:DictionaryType gml:UnitDefinitionType

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

A definition, which can be included in or referenced by a dictionary. In this extended type, the inherited "description" optional element can hold the definition whenever only text is needed. The inherited "name" elements can provide one or more brief terms for which this is the definition. The inherited "metaDataProperty" elements can be used to reference or include more information about this definition.  
The gml:id attribute is required - it must be possible to reference this definition using this handle.

complexType gml:DictionaryEntryType

diagram

namespace

http://www.opengis.net/gml

gml:definitionMember gml:dictionaryEntry


        The 'show' attribute is used to communicate the desired presentation 
        of the ending resource on traversal from the starting resource; it's 
        value should be treated as follows: 
        new - load ending resource in a new window, frame, pane, or other 
              presentation context
        replace - load the resource in the same window, frame, pane, or 
                  other presentation context
        embed - load ending resource in place of the presentation of the 
                starting resource
        other - behavior is unconstrained; examine other markup in the 
                link for hints 
        none - behavior is unconstrained

xlink:actuate

optional

documentation


        The 'actuate' attribute is used to communicate the desired timing 
        of traversal from the starting resource to the ending resource; 
        it's value should be treated as follows:
        onLoad - traverse to the ending resource immediately on loading 
                 the starting resource 
        onRequest - traverse from the starting resource to the ending 
                    resource only on a post-loading event triggered for 
                    this purpose 
        other - behavior is unconstrained; examine other markup in link 
                for hints 
        none - behavior is unconstrained

gml:remoteSchema

optional

documentation

Reference to an XML Schema fragment that specifies the content model of the property’s value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.

annotation

documentation

An entry in a dictionary of definitions. An instance of this type contains or refers to a definition object.  

The number of definitions contained in this dictionaryEntry is restricted to one, but a DefinitionCollection or Dictionary that contains multiple definitions can be substituted if needed. Specialized descendents of this dictionaryEntry might be restricted in an application schema to allow only including specified types of definitions as valid entries in a dictionary.

complexType gml:DictionaryType

diagram

namespace

http://www.opengis.net/gml

type

extension of gml:DefinitionType

properties

base	gml:DefinitionType

children

gml:metaDataProperty gml:description gml:name gml:dictionaryEntry gml:indirectEntry

used by

elements

gml:DefinitionCollection gml:Dictionary

Database handle for the object.  It is of XML type “ID”, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator “#”, and the value of the id attribute.

annotation

documentation

A non-abstract bag that is specialized for use as a dictionary which contains a set of definitions. These definitions are referenced from other places, in the same and different XML documents. In this restricted type, the inherited optional "description" element can be used for a description of this dictionary. The inherited optional "name" element can be used for the name(s) of this dictionary. The inherited "metaDataProperty" elements can be used to reference or contain more information about this dictionary. The inherited required gml:id attribute allows the dictionary to be referenced using this handle.

complexType gml:IndirectEntryType

diagram

namespace

http://www.opengis.net/gml

An entry in a dictionary of definitions that contains a GML object which references a remote definition object. This entry is expected to be convenient in allowing multiple elements in one XML document to contain short (abbreviated XPointer) references, which are resolved to an external definition provided in a Dictionary element in the same XML document. Specialized descendents of this dictionaryEntry might be restricted in an application schema to allow only including specified types of definitions as valid entries in a dictionary.

XML Schema documentation generated with XMLSpy Schema Editor http://www.altova.com/xmlspy